new motor runs goood

Rick 91GT · 07-05-2001, 07:35 AM

Sounds like you'll be happy with all that new power. I can't believe you have Stage 2 ported Holley intakes as they flow ungodly numbers already, what do the heads flow? I was talking to Ron at Foxlake about porting mine and he said for the most part they will fully port the lower but leave the upper alone since it flows so big already, those things must move a lot of air for you. Do you know the flow numbers on the intakes also, did they have to cut it in half, port and re-weld it?

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP

[This message has been edited by Rick 91GT (edited 07-05-2001).]

07-05-2001, 07:35 AM	#3
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	Sounds like you'll be happy with all that new power. I can't believe you have Stage 2 ported Holley intakes as they flow ungodly numbers already, what do the heads flow? I was talking to Ron at Foxlake about porting mine and he said for the most part they will fully port the lower but leave the upper alone since it flows so big already, those things must move a lot of air for you. Do you know the flow numbers on the intakes also, did they have to cut it in half, port and re-weld it? ------------------ Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP [This message has been edited by Rick 91GT (edited 07-05-2001).]