ALOT OF BROKEN T-5's...Time for Tremec group purchase??

Rick 91GT · 07-11-2001, 12:30 PM

The only reason I didn't go to a Tremec the last time around was $$$$ to convert. I would have to get another SFI approved bellhousing to fit the Tremec, SFI approved Clutch to fit the Tremec, and a new Shifter. I think a lot of guys think it is as simple as just swapping trannies but it's not and when you have invested all the money in the saftey equipment needed for the T-5, and can rebuild them your self..it is cheaper to stay T-5, until you go to a Lentech like Jeff!

Persoanlly I'll stay with the T-5 for now, but if it keeps failing especially after the Turbo is installed

then I will look at another set-up, most likely a Tremec race prepped by Hanlon, his lasts all season with out a tear down, that is awesome!

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Group Purchase on trans stuff	mazur50	Windsor Power	1	04-18-2001 09:12 AM
PMS Group Purchase	stang lover	Windsor Power	0	04-13-2001 06:34 PM
AFR heads and Flaming River - Group Purchase - CHEAP!!!	2FastLX	Windsor Power	0	03-10-2001 03:14 PM
Group Purchase on PI Torque Converters!!!	kevbo302	Windsor Power	2	03-08-2001 11:07 PM
"Group Purchase" E-mail group!! more.....	stang lover	Windsor Power	3	02-04-2001 11:34 PM

07-11-2001, 12:30 PM	#7
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	The only reason I didn't go to a Tremec the last time around was $$$$ to convert. I would have to get another SFI approved bellhousing to fit the Tremec, SFI approved Clutch to fit the Tremec, and a new Shifter. I think a lot of guys think it is as simple as just swapping trannies but it's not and when you have invested all the money in the saftey equipment needed for the T-5, and can rebuild them your self..it is cheaper to stay T-5, until you go to a Lentech like Jeff! Persoanlly I'll stay with the T-5 for now, but if it keeps failing especially after the Turbo is installed then I will look at another set-up, most likely a Tremec race prepped by Hanlon, his lasts all season with out a tear down, that is awesome! ------------------ Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP