Hybrid Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
02-19-2003, 04:13 PM
|
#1 |
|
Registered Member
Join Date: Mar 2000
Location: Boston, MA
Posts: 334
|
OK so it was the rod bolts that gave you clearence problems? I'm running a stock block, stock rods, ARP rod bolts and cap studs, a Canton 7 qt and either a FRPP or Melling high volume pump.
What I'm worried about is the bearing caps. Do you know if they needed to be clearenced or leveled at all? If I can install this system without having my caps milled I can do it at home. If not I need to bring it to the machine shop. At that point its turning $400 into 5 or $600 and I could have put that into something that will actually make power. I was looking into a Girdle and tray because I am thinking about a supercharger for the summer. |
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Main girdle or windage tray or both? | Fulcrum | Windsor Power | 11 | 11-04-2003 04:51 PM |
| Oilpan, girdle, windage tray,and crankscraper? | 93 Cobra needs input | Windsor Power | 7 | 11-07-2002 09:35 PM |