© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
02-21-2003, 04:31 AM | #1 |
Registered Member
Join Date: Feb 2003
Location: Ont. Canada
Posts: 6
|
s-trim vortech, intercool or not
Have a vortech s-trim 8 pound on my 01 gt. Any opinions or hard data to show if it's worth the money to put the air-water intercooler on that is offered for these superchargers.
|
02-21-2003, 09:48 AM | #2 |
Registered Member
Join Date: Dec 2002
Location: Columbus, OH
Posts: 100
|
I'd put one in if you have the cash and increase the boost too about 10.
Murdock |
02-21-2003, 01:03 PM | #3 |
Old School ROUSH
Join Date: Nov 1999
Location: Stockbridge, GA
Posts: 531
|
No hard #s but the safety margin is indisputable.
I'd recommend getting the intercooler or aftercooler set-up. |
02-21-2003, 06:39 PM | #4 |
Registered Member
Join Date: Sep 2002
Location: Ponte Vedra Beach, FL
Posts: 122
|
If I had the extra cash lying around right now I'd definitely go for it. I have strongly considered one for my car just for the engine protection along, plus the extra 40 or so hp would be a bonus.
__________________
'00 GT 5-spd Vortech S-Trim 3.1" Pulley Paxton Air-to-Air Aftercooler 90 mm MAS 42 lb injectors Cobra Fuel Pump 70 mm AccuFab Throttlebody C & L Intake Plenum 2 1/2" X-pipes Anderson PowerPipe MagnaFlow Mufflers Diablo Custom Chip 3.73's Steeda Lower Control Arms 358 rwhp (Mustang Dyno) New Track Times Coming Soon |
02-23-2003, 12:00 AM | #5 |
Registered Member
Join Date: Feb 2003
Location: Ont. Canada
Posts: 6
|
Thanks guys, I will go with the cooler. I would love to go to a 10 or even more a 12lb pully but I might keep it at 8lbs and still have a warrenty from vortech.
|
02-23-2003, 12:15 AM | #6 | |
AKA "Dr. Evil"
Join Date: Feb 1999
Location: South Fork Ranch
Posts: 1,721
|
Quote:
__________________
Uncle Sam "What the hell is up with all the gauges? Calling Captain Kirk, your ride awaits... Phasers on stun...." |
|
02-23-2003, 10:38 AM | #7 |
College Stanger
Join Date: May 1999
Location: Aiken,south carolina, usa
Posts: 1,097
|
I agree I would also get a cooler if given the choice.
__________________
2003 Sonic Blue Cobra |
02-25-2003, 11:39 PM | #8 |
Registered Member
Join Date: Feb 2003
Location: Seattle, Wa.
Posts: 175
|
Every time I have ever seen a aftercooler upgrade for the Vortech supercharger they have come with a smaller pulley for the supercharger to make more boost to take advantage of the much cooler air charge. I have not seen any detonation issues on pump (92-93) gas with Vortech's kit. They seem to work extremly well.
__________________
No matter how much you spend, or how much you prepare, there is ALWAYS someone else faster or quicker than YOU!!!!!!!!!! |
02-26-2003, 06:23 PM | #9 |
Registered Member
Join Date: Jul 2002
Location: Manteca,Ca.
Posts: 114
|
Detonation
There are always issues of detonation on a blown motor , ifiyou do not have a good tune (on a dyno by someone who knows) I have blown 3 motors as a result of a poor mechanic and tune. I run a vortech with aftclr pumping 14 lbs of boost..But I am running forged Eagle rods CP pistons Molley rings best racing bearings ARP bolts and studs thruout and 8.2 comp. pistons, etc. ,etc..
__________________
98 cobra convt. 515 rwhp 421 torque..554 rwhp on 98 octane..635 rwhp this summer |
02-27-2003, 09:16 PM | #10 |
Registered Member
Join Date: Dec 2002
Location: Columbus, OH
Posts: 100
|
Technick...has the right idea! If you don't increase boost you will actually loss boost with an intercooler.
Murdock |
02-28-2003, 02:16 AM | #11 |
Registered Member
Join Date: Feb 2003
Location: Ont. Canada
Posts: 6
|
Went on the Vortech web site and your right they send a new pully with the kit. As stated you will lose some boost with any efficient innercooler and this new pully should make up for it. Makes me wonder NEW QUESTION? how much boost a stock automatic 01 gt motor can handle provided the fuel, timing, and detonation are kept in check? This car when played with is played hard, but also serves as a daily driver. Planning on having it on the dyno in a few months and hopefully after a few phone calls ( trial & error), diablo can cut me a dam good chip. Thanks for your help!
|
02-28-2003, 06:37 PM | #12 |
Registered Member
Join Date: Jul 2002
Location: Manteca,Ca.
Posts: 114
|
Highly recommend you do not rely upon a mail order chip! Chances are great you will blow ring glands under some good boost if the A/F ratio and timing is not set for your motor. ..needs to be tuned on a dyno by someone you can trust......if you don't already hve them ,I recommend fuel pressure and boost gages......Good luck
__________________
98 cobra convt. 515 rwhp 421 torque..554 rwhp on 98 octane..635 rwhp this summer |
03-04-2003, 12:58 AM | #13 |
Registered Member
Join Date: Feb 2003
Location: Seattle, Wa.
Posts: 175
|
You can run up to 14-16 psi of boost pressure, IF you do not have detonation! 1 ping and your toast. If you get the A/F ratio right it is amazing how much power these engines will make stock. But remember NO DETONATION! Ran a 98 Cobra on the dyno with 15 psi boost, EVERYTHING else was STOCK but the Whipplecharger, made 450 rwhp. Put it on the street and the added load of wind resistance and road resistance at 120 plus mph and BANG! out came one connecting rod out of the side of the block! It don't take much to cross the line and ruin everything if you run on the ragged edge.
__________________
No matter how much you spend, or how much you prepare, there is ALWAYS someone else faster or quicker than YOU!!!!!!!!!! |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Surging / Bucking with SQ trim Vortech | NoPony | Power Adders | 2 | 07-12-2003 07:41 AM |
Vortech Supercharger | -viscid-01-GT- | Modular Madness | 5 | 05-09-2003 11:53 AM |
ys trim on a 95gt????? WTF | sn95gt19 | Windsor Power | 1 | 02-25-2003 09:09 PM |
novi 2000 vs. vortech s,ys trim | 5.slow | Blue Oval Lounge | 5 | 11-23-2002 12:37 PM |
Holley systemax 2 + Vortech A trim? | Dave_mustang_50 | Windsor Power | 3 | 12-05-2001 07:27 PM |