MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 04-28-2003, 09:29 PM   #3
bigred90gt
2 Stangs in the Stable
 
bigred90gt's Avatar
 
Join Date: Apr 2002
Location: Baytown, TX
Posts: 1,209
Default

Quote:
Originally posted by NotchJohnson
Basically the spout connector tells the computer that it is alright to use its programmed timing curves, therefore it advances the timing in relation to throttle increase. Without the spout in place, the car will run at constant initial timing, or what you set the timing to. If you set your car to run at 14 degrees initial, it will stay at 14 degrees no matter how much throttle you give it. I have heard of people setting their cars to 28 degrees initial and having the car run great (using good gas of course) but I have never tried it. I have also HEARD that without the spout in place, it disables the computers rev limiter, but as to the truth to this rumor I have no idea.
You can advance your timing to about 26-28 and run without the spout, in short burst like at the track. It is not recommended that you do that and drive for prolonged periods of time. I would suggest getting one asap. If nothing else, you could rig something (conductive like foil) to stuff in there to close the circut until you get a plug, but I dont suggest you keep that in too long either. I dont think there is any inner workings in the plug, I think it just closes the loop. Someone can back me or shoot me down, I dont want to recommend you do that unless I can get some backing that it wont hurt anything.

Caymon
__________________
'90 GT Under construction
Best E.T. = Fast @ High Speeds - OK So I Lie. So What!!!
04 F-150 STX 4.2L 5 spd
Rice Haters Club Member #128
bigred90gt is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ford Racing Spark Plug Wires dragstang86 Windsor Power 5 02-11-2003 01:41 PM
Ignition harness plug for 69 Mustang Barts_65 Classic Mustangs 1 11-01-2001 05:59 PM
2 wire plug by distributor? 90'5.0 Conv Windsor Power 1 08-21-2001 07:03 PM
Tired of Life and Things going WRONG!! Mercury Blue Oval Lounge 20 07-06-2001 03:27 AM
Plug choices? slo95 Windsor Power 2 03-08-2001 08:52 PM


All times are GMT -5. The time now is 10:09 AM.


SEARCH