The engine won't fire up...is the timing off?

[Rick 91GT]

You need to bring the car back to TDC, then re-insert the distributor making sure the rotor is pointing at #1 on the cap. The Spout connector must be out when setting the timing, but start the motor with the plug in. If not you are seeing total advance all the time. I hope yor plugs are at .050 I'm sure that was just a typing error Good luck sounds like that will be one healthy motor. Lets us know when you get the beast started.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP