MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Website Community > Stang Stories
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 08-21-2003, 12:09 AM   #1
Coupe50h
Registered Member
 
Coupe50h's Avatar
 
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
Default

Quote:
Originally posted by T88H34GSUPRA
Now as you can see the Big Engine has a distinct advantage up to 3000rpms, after that, the smaller one surpasses it. The Big Engine also wont even rev past 4000rpm. So what does this mean? We'll, if both these engines were in the same type of car, with the same gearing. Then if they both raced side by side, the big engined car would easily pull away off the line, and would continue to pull till he reached a little over 3000rpm. At this point, the smaller, but higher output engine would just begin to make its real power. By 4000, the big engine car has to up shift to 2nd gear, and the resulting change in gearing means that even though it is back at it's torque peak, it is actually putting less torque to the ground than the smaller engine car, which since it can rev higher, is still in 1st gear, and enjoying more gear reduction. And as they keep up shifting and going faster, the difference will only get more pronounced.
BS

You made some good points, but you are talking about different engines, you can alter the torque peaks, and where they cross with any engine, a turboed v6 can be meant as a drag car, or a topend car, they will be good at what they are setup for.
Do not say the smaller motor has an advantage, we all heard "no replacemet for displacemet" you better believe it!!......what happens if you give a bigblock forced induction? it is going to whoop the smaller turboed engine twice as bad genius! x23849
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's.
race weight 3,160

12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear

13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear
Coupe50h is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Anyone Drove A Twin Turbo 5.0??? BowTie Eater 5 Liter Blue Oval Lounge 9 02-06-2002 07:12 AM
Speed Innovations Twin Turbo Kit Questions??? BowTie Eater 5 Liter Windsor Power 1 07-17-2001 11:07 PM
00' GT vs. Twin Turbo Supra 00'BlackSteed Stang Stories 6 06-22-2001 06:23 PM
must see!!! twin turbo supra 874RWHP 88COBRA Blue Oval Lounge 2 02-20-2001 07:08 PM
MSD Boost Timing Master. A Good Thing To Use With A Twin Turbo? BowTie Eater 5 Liter Windsor Power 7 01-21-2001 06:57 PM


All times are GMT -5. The time now is 07:52 AM.


SEARCH