Cobra or Trick Flow intake with GT40P heads?

SaleenGTS · 01-24-2001, 02:54 PM

Sorry I wasn't clear, I meant that if you wanted to upgrade your TB from the 65(I think the cobra came stock with those) it wouldn't do any good, since the EGR is built in, and you can't bore it any over 65. I upgraded up from a stock 58 to a BBK 70mm, and noticed a huge difference with my TFS Intake. If you are only srteet racing, I would not recommend the track heat intake, you will lose a lot of bottom end, and the P heads aren't great high rpm heads compared to aluminum bigger valved heads. If you are going with only a 100 shot of nos, go with a TFS, Performer, or a EH GT-40 and a bigger TB.

also IMHO, MAC products are mediocre at best.

------------------
Dustin
1990 Saleen GTSport #14
TFS Street Heat Upper & Lower(Black), TFS TW heads, TFS 3/8" Phenolic Spacer, E303 Cam, FMS 1.6 Roller Rockers, BBK 70mm TB, FMS 70mm MAF, MAC 1 5/8" Equals, Dynomax Super Turbo 2 1/2" cat back, Bassani 2 1/2" Off-Road X-Pipe, MSD 6AL Ignition w/ MSD TFI Coil, Home made Ram Air, Racecraft Suspension

60ft: 2.158
330ft: 5.396
660ft: 8.271 @ 91.43

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Head and intake flow. Something to think about. :)	5ohCOUPE	Windsor Power	3	03-16-2003 08:52 AM
Speed Secret # 3	jim_howard_pdx	Windsor Power	13	11-09-2002 10:35 AM
gt-40 heads and cobra intake	homeroV8	Windsor Power	0	11-05-2002 06:17 PM
Cobra Intake?	95mustanggt	Windsor Power	5	10-01-2002 09:55 AM
Trick Flow "Street" vs. Cobra. Which Is Better?	BowTie Eater 5 Liter	Windsor Power	5	01-17-2001 06:17 PM

01-24-2001, 02:54 PM	#1
SaleenGTS RICE taste like Chicken Join Date: Jun 2000 Location: Edmond, OK Posts: 687	Sorry I wasn't clear, I meant that if you wanted to upgrade your TB from the 65(I think the cobra came stock with those) it wouldn't do any good, since the EGR is built in, and you can't bore it any over 65. I upgraded up from a stock 58 to a BBK 70mm, and noticed a huge difference with my TFS Intake. If you are only srteet racing, I would not recommend the track heat intake, you will lose a lot of bottom end, and the P heads aren't great high rpm heads compared to aluminum bigger valved heads. If you are going with only a 100 shot of nos, go with a TFS, Performer, or a EH GT-40 and a bigger TB. also IMHO, MAC products are mediocre at best. ------------------ Dustin 1990 Saleen GTSport #14 TFS Street Heat Upper & Lower(Black), TFS TW heads, TFS 3/8" Phenolic Spacer, E303 Cam, FMS 1.6 Roller Rockers, BBK 70mm TB, FMS 70mm MAF, MAC 1 5/8" Equals, Dynomax Super Turbo 2 1/2" cat back, Bassani 2 1/2" Off-Road X-Pipe, MSD 6AL Ignition w/ MSD TFI Coil, Home made Ram Air, Racecraft Suspension 60ft: 2.158 330ft: 5.396 660ft: 8.271 @ 91.43