100 shot with stock injectors?? ok?

[Coupe50h]

Originally posted by ultraflo
I also think you'll be alright... keep an eye on your bottle pressure (900min-1050max psi), step down one heat range on your plugs, and gap them @ .035"

Do you have an adj. fuel pressure regulator and a gauge mounted on the cowl to monitor fuel pressure? If not, it's something to consider...

As for ET, it's hard to say... I'd guess anywhere from 11.9's to 12.20's with a good tune and traction.

Well the 24's are in, and a 75mm maf to go along, im tossing the 73mm. n20 is coming soon, well i want to stay away from the wet kit's, to the guys saying they dont like the 5115 kit, just staying simple, and yes the bottle heater helps alot i understand...

Would my plugs be alright at .045??
I have a fuel guage, but it's on the shrader valve, i'll have a n20 guage, but it will be mounted on the bottle, should i worry about bottle psi while im running down the track??

Thanx alot, and im going to try my hardest for an 11 sec pass.....