What year and type of motor do I have..

Smokedawg · 08-14-2001, 08:21 AM

Hey PKRWUD--
So you say they are the weakest motors made...Is the block ok though?? I will be replacing the cam and pistons, Making this a roller motor, Ported, polished, big valves, milled windsor heads...1.6 RR's, Performer RPM intake, and am undecided on the carburator yet. Should this make some decent HP?? The cam will be a X303 and SRP 306 pistons..

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What Type Transmission	Kisner	Classic Mustangs	1	02-03-2001 11:30 PM

08-14-2001, 08:21 AM	#13
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	Hey PKRWUD-- So you say they are the weakest motors made...Is the block ok though?? I will be replacing the cam and pistons, Making this a roller motor, Ported, polished, big valves, milled windsor heads...1.6 RR's, Performer RPM intake, and am undecided on the carburator yet. Should this make some decent HP?? The cam will be a X303 and SRP 306 pistons.. ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.