MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 11-21-2003, 11:46 AM   #1
SmokinStangGT
Registered Member
 
SmokinStangGT's Avatar
 
Join Date: Sep 2002
Location: IL
Posts: 105
Default

Thanks for the replies, i have the same low compression all around the motor, and i thought the reason could be because the oil is turning to water, letting the air seep through the rings. would that be right? and when it was just put together again before this last time it ran great, but then i think the coolent was breaking down the oil and getting into the intake of the heads.... and im pretty sure that the coolent pressure could be great enough to spray from the lower intake in the left rear to get into the oil right??? -Thanks for any thoughts, and i may just do what crazypete said with come gasket sealer and tourqe those bolts down nice and keep checking them and if it continues then i will know i have a gasket leak, unless you guys tell me to pull my heads! Thanks again!
__________________
89' GT with 5spd Hurst short throw, Keith Black 12:1 comp. pistons, Sealed Power drag racing rings, Fms F303 Cam, Ported and polished upper and lower intake with Ported E7TE heads that contain comp. cam double coiled springs with titainum locks and steel retainers, Fel-Pro Head Gaskets, 9mm ford racing wires, BBK chrome unequal shortys, Power Throttle bodies 70mm, Edlebrock 70mm EGR plate, 15inch K&N, Bassani X-pipe, Flowmaster 40 series, Eibach 1 1/2 lowering springs, Cobra R rims 17X9 with p235 on front and p275 on rear with Falken Zeix tires-RUNNING!
SmokinStangGT is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Trick Flow intake problems shacar87 Windsor Power 9 11-14-2003 05:53 PM
Explore intake??????????? William Bowers Windsor Power 2 02-14-2002 10:27 PM
HELP!!! oil in intake, what to do?? bosco Windsor Power 4 02-03-2002 05:02 PM
OIL IN INTAKE almost sure from 'pcv' QUIN Windsor Power 8 03-09-2001 01:58 PM
Is the true about Edelbrock heads with TFS intake? gt93mustang Windsor Power 14 03-06-2001 07:01 PM


All times are GMT -5. The time now is 03:47 PM.


SEARCH