
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
#6 |
|
Registered Member
Join Date: Nov 2003
Location: Rockford
Posts: 596
|
Hello, sounds like you have a cool combo. I believe you should be at least a 12.0 car maybe as fast as a mid 11 sec. at sea level but, weather, traction, driving habits etc, play a huge role. Not to say that you not a good driver, but just keep practicing your driving, all of us could do better with practice, even John Force. But what do I know? As goes for your gearing, I would put in 4.10 gears, and hope for at least a 1.6 to a low 1.7 60-foot. Before I forget I would replace those valve springs to support like.600 lift. Just because you don't see coil bind doesn't mean there are the right springs. Need to check your seat pressure and open pressure to make sure they are good enough for that cam. You could be floating the valves on the top end and not really know it! I would check the springs before you hurt something that really costs a lot more then just replacing valve springs.
Good luck |
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 351w or 347 stroker? which is better? | BLACK85GT | Windsor Power | 55 | 12-21-2002 06:52 PM |
| 351W heads on 289 stock engine | sleeperstang | Classic Mustangs | 5 | 11-21-2002 08:35 PM |
| FAST vs. Chip | STEEDAJEFF | Windsor Power | 1 | 09-29-2002 02:16 PM |
| 351W in a Fox body | greydan | Windsor Power | 4 | 07-03-2002 02:33 PM |
| Are these fast?? | Dark_5.0 | Stang Stories | 13 | 05-16-2002 01:19 PM |
