
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
#6 | |
|
Registered Member
Join Date: Nov 2003
Location: Rockford
Posts: 596
|
Quote:
So lets see... you said cheap...how about free! Fill the front tires to 50-55 psi. Set the rear tires to about 24-28 psi. (all cars vary) Remove the front sway bar Remove all unwanted weight from the cowl forward. Then if you want to start spending some money... Sub-frame connecters Aftermarket rear lower control arms ( Mega bites, south sides, etc) Air bag (install right rear spring with about 4-8 psi.) If you like, you can put four cylinder springs in the front. Then go get some slicks... 26x8.5 on stock 15 inch wheels, or 26x10 if you get some 15x8 wheels. Leave your Coopers for the street and real drag slicks for the track. (unless you get some punk that wants to run you on the street )*Battery in the trunk and slicks will require you to have a master battery disconnect and a drive shaft loop.* Lakewood 70/30 or 90/10 front struts. Now this is by no means the best stuff, but for the money its hard to beat. Now I am sure somebody might know some additional stuff but this will help alot. If you get all of these things, I don't see why you couldn't get a low 1.7 60ft and a solid 12 sec. pass! Good luck and have fun. ![]() |
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Good, cheap place to get hoods and wings? | Chris41279 | Appearance & Detailing | 2 | 07-16-2004 01:26 AM |
| Cheap Cheap Porting Would it work? | vetteeatr | Blue Oval Lounge | 1 | 11-02-2002 10:34 AM |
| K & N drop in filters...questions... | MineralGray02K | Modular Madness | 3 | 07-18-2002 09:08 PM |
| Wheels for cheap... | 90LxDroptop | Windsor Power | 0 | 04-13-2002 01:43 AM |
| Anyone drop in a stroker or big block? | sgwinn | Windsor Power | 2 | 08-01-2001 11:52 PM |
