BXR intake opinions

84_GT350 · 08-19-2001, 05:15 PM

Treu...they will destroy just about any other intake out there. When was the last time you looked down the runner of a 5.0 intake and saw the intake valve? But they're insanely expensive. Mostly because of the modified (belt-driven I believe) distrubtor that you NEED because a stock type won't fit under the massive intake. The removable plenum covers are nice though. If you want more torque, slap on a different plenum. Or go with the high rpm plenum. A lot of the vacuum lines and such are a bit of a pain and you have to buy a kit to use A/C. All in all...is it a kick @ss intake? Yes. Is it worth the $1000+ you'll pay after adding up the options? That's a matter of opinion. And dispite it's odd appearence it can be supercharged. Damn that would be soooooo wicked. But if you're Mr. Moneybags they who cares? Buy it and run it. I'm personally suprised they're still in business...seeing as they charge so much.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

"I made the turn at 108,
And he was up on my back gate,
And I knew he had something bad,
Underneath that hood.
So I pushed it up to 110,

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Trick Flow intake problems	shacar87	Windsor Power	9	11-14-2003 05:53 PM
Explore intake???????????	William Bowers	Windsor Power	2	02-14-2002 10:27 PM
HELP!!! oil in intake, what to do??	bosco	Windsor Power	4	02-03-2002 05:02 PM
OIL IN INTAKE almost sure from 'pcv'	QUIN	Windsor Power	8	03-09-2001 01:58 PM
Is the true about Edelbrock heads with TFS intake?	gt93mustang	Windsor Power	14	03-06-2001 07:01 PM

08-19-2001, 05:15 PM	#3
84_GT350 Registered Member Join Date: Apr 1999 Location: Overland Park, KS, USA Posts: 1,631	Treu...they will destroy just about any other intake out there. When was the last time you looked down the runner of a 5.0 intake and saw the intake valve? But they're insanely expensive. Mostly because of the modified (belt-driven I believe) distrubtor that you NEED because a stock type won't fit under the massive intake. The removable plenum covers are nice though. If you want more torque, slap on a different plenum. Or go with the high rpm plenum. A lot of the vacuum lines and such are a bit of a pain and you have to buy a kit to use A/C. All in all...is it a kick @ss intake? Yes. Is it worth the $1000+ you'll pay after adding up the options? That's a matter of opinion. And dispite it's odd appearence it can be supercharged. Damn that would be soooooo wicked. But if you're Mr. Moneybags they who cares? Buy it and run it. I'm personally suprised they're still in business...seeing as they charge so much. ------------------ 1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s "I made the turn at 108, And he was up on my back gate, And I knew he had something bad, Underneath that hood. So I pushed it up to 110,