car sags more to one side than the other after spring install

[Rick 91GT]

Originally posted by 5.0 HO:
Make sure that the end of the springs are all facing the same way or that will cause a difference in ride height.

The end of the spring at the bottom you have to make sure that they are facing the same way on both sides.

Hope this helps..

Yep, he's right. Check that first a buddy of mine had his installed at a shop and they did them wrong, we had to pull it apart and fix them.



------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension, SPEC stage III clutch, Lakewood SFI bell, S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! <B