MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Classic Mustangs
Register FAQ Members List Calendar

Notices


 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 03-06-2004, 11:36 AM   #8
hobgoblin351
Registered Member
 
Join Date: Sep 2002
Location: NYC
Posts: 245
Default

If you are still getting a draw whith all the fuses out, start checking the systems that have constant power. Ignition switch, horn ,hazards etc. It could be the harness, but if it visually looks good chances are its not bad and just grounding somewhere. I had this problem for a long time, and I did install a cutoff until I found it. How is the under hood harness, charred, dried out? Mine got mangled in a fire, replaced and I still and a draw on the battery. I finally tracked it down to a faulty horn switch, it was grounding to the steering colum. If you dont have one already get a wiring diagram. You can cross things off as you go along. You'd be surprised on what systems are wired together too! That a test light, and does your volt tester check for continuity? That comes in handy too. Take your time and keep track of what you've illiminated. There are only so many systems on an old mustang, you'll track it down. Just be glad it's not one of these new ones with 10,000 wires!
__________________
1970 Stang Conv:
en:Boss351 (balanced/blueprinted)
mech cam(240*@.050/.540 lift)
Scrw in studs/comp cams rllr rkr
Mldn valves 2.19in 1.71ex
ported polished cc'd hrdnd ex
Keith Black FT pistons(10.25/1)
Weiand Excellorator manifold
Holley700 DP mech 2nds
MSD 6 box and Dis
Headers/2 1/2 inch duels
tr: modified FMX
re:9-inch/3.89 limited slip
hobgoblin351 is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
follow up to horrible vibration problem Toeclicker Windsor Power 4 12-18-2003 06:38 PM
1988 2.3 Conv Mustang problem with Fan???? Mustang 2.3 Conv Small Ponies 0 05-20-2003 07:58 PM
Please help stutering problem Just me Windsor Power 10 10-18-2002 02:37 PM
surging problem? speed_Freek170 Small Ponies 1 08-30-2001 11:58 AM
Surging Problem - Help Lawless Windsor Power 32 08-19-2001 10:57 PM


All times are GMT -5. The time now is 04:26 PM.


SEARCH