3.27 - 4.10 Gearing ???

explicitone · 03-19-2004, 02:03 AM

4.10s do not still feel slow down low they help get off the line at 1000 or 6000 I can cruise in 5th gear @30(1200) and still pull 5th all the way to what ever with out ever needing to down shift.

yes you can still use 1st and 2nd yes the car will go through these gears faster the same with 3rd and 4th

at time when I dont feel like shifting I will start in 2nd and then shift to 4th and then to 5th no lag at all

it might be that you have a 70mm t/b with the stock plenum is know by almost everybody that it has no gain and will cause you to lose power down low and mid range and jba headers which show no gains at all on a non supercharged car the only thing they do is drain your wallet(blue00gt)

wanted to clear up somethings so all this bad info does not keep getting passed on to other newbes

OH and the k/b twin is made for the 2v motors so the is no need to change the k-member or the hood the only power adder ment for the street that these things might need to be changed is some tubro setups

03-19-2004, 02:03 AM	#11
explicitone Registered Member Join Date: Apr 2002 Location: racine ,wi Posts: 691	4.10s do not still feel slow down low they help get off the line at 1000 or 6000 I can cruise in 5th gear @30(1200) and still pull 5th all the way to what ever with out ever needing to down shift. yes you can still use 1st and 2nd yes the car will go through these gears faster the same with 3rd and 4th at time when I dont feel like shifting I will start in 2nd and then shift to 4th and then to 5th no lag at all it might be that you have a 70mm t/b with the stock plenum is know by almost everybody that it has no gain and will cause you to lose power down low and mid range and jba headers which show no gains at all on a non supercharged car the only thing they do is drain your wallet(blue00gt) wanted to clear up somethings so all this bad info does not keep getting passed on to other newbes OH and the k/b twin is made for the 2v motors so the is no need to change the k-member or the hood the only power adder ment for the street that these things might need to be changed is some tubro setups __________________ RUN IT STAIGHT AND RUN IT HARD ________ Novi 2000 60' 1.46 1/4 10.67 mph 126.5 _________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3.73 v. 4.10 Gears	GTMustang96	Modular Madness	20	03-20-2003 06:36 PM
4.10 Or 4.30 Gears In 8" Rear?	jimijuggernaut	Classic Mustangs	4	02-28-2003 04:33 PM
86 GT gear chose 4.10 or 3.73	eeh1025	Windsor Power	2	02-03-2003 02:44 PM
4.10 gears	swtstang	Windsor Power	1	06-22-2001 06:33 PM
3.55, 3.73 or 4.10	Mouse Eater	Windsor Power	12	01-15-2001 08:03 AM