MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Modular Madness
Register FAQ Members List Calendar

Notices


 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 03-20-2004, 12:05 AM   #11
xxxBlakexxx
Registered Member
 
xxxBlakexxx's Avatar
 
Join Date: Sep 2003
Location: Mountaintop, PA
Posts: 634
Default

Your comment about the rpm's taking too long to drop may be a personal issue or perhaps your standards are just different than mine, but this is not a problem I have had generally with my car. The ONLY time I had an issue with this was when I was having problems with my TPS. These problems ocurred after installing my plenum and larger TB. I damaged the TPS during the job, but did not realize it until I put it all back together.

When I replaced the TPS, the rps responded as they had before. I merely suggest this since I can not hear your engine. But, you may want to try replacing the TPS. They run about $30. I would ask the parts supplier that you use if you can return it if you see no change. Also, before trying this, you may want to disconnect your battery and then hook it back up again. Then start the car and let it idle for about 10 minutes. This will re-program your computer. I don't think this will help, but it is worth a try. Takes only seconds. You must follow this same procedure when installing a new TPS too.

Just a thought.
__________________
"Children should not get cancer, but they do!" Help a child with cancer at www.homeoftheirown.org

My Stang:
2000 Mustang GT Vert - Steeda Tri-Ax Shifter; C&L Plenum; BBK 75 mm TB; Steeda Strut Tower Supports; Black "Deep Dish" Bullet Wheels; FRPP 4.10's; Steeda Subframes; SLP Catback & SLP Catted X-Pipe; SCT 4 Position Chip with 3 custom tunes; Steeda CAI; Venom-1000 Nitrous; Roush Stage 3 Body Kit; Bullet Suspension Package (on the way)
xxxBlakexxx is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
3.73 v. 4.10 Gears GTMustang96 Modular Madness 20 03-20-2003 06:36 PM
4.10 Or 4.30 Gears In 8" Rear? jimijuggernaut Classic Mustangs 4 02-28-2003 04:33 PM
86 GT gear chose 4.10 or 3.73 eeh1025 Windsor Power 2 02-03-2003 02:44 PM
4.10 gears swtstang Windsor Power 1 06-22-2001 06:33 PM
3.55, 3.73 or 4.10 Mouse Eater Windsor Power 12 01-15-2001 08:03 AM


All times are GMT -5. The time now is 06:49 PM.


SEARCH