Hybrid Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
06-26-2004, 03:28 PM
|
#1 |
|
Registered Member
Join Date: Apr 2001
Posts: 167
|
ok, i have a breather on the pcv valve. i didn not see any oil on the dip stick tube so i dont think it is coming out of there. i can see it wet on the passenger side back under the valve cover where the transmission? mounts to the motor. is this the rear main seal? i amt hinking it gets blown out and pours down the exhaust. i checked my oil today and i needed to add 1/2 quart. i was full before i went to the track! I pulled spark plug #5 and the pice that curls over is white on the outside. under it where it is over the point, it is black.
i hear these holley II kits create so much oil pressure it sprays it out places??? jim
__________________
OLD CAR-89 lx convt- Flowtech II headers, H-pipe, 2 1/2 "flowmasters- pulleys- 3.73's, ripper shifter- ram air- Best 1/4 mile time- a measley 14.2 at 98.6  PRESENT CAR- 90 LX BBK long tubes, h-pipe with cats, flowmasters. 3.55's holley systemax II kit- 70 mm TB 30#injectors, jacobs ignition, black magic fan, 180 thermostat, 75 shot of NOS- NITTO DR'S STREET TIRE BEST RUNS 1/4 mile13.2 @112 w/ NOS 2.17 60' 13.5 @103 2.1 60' *new time with Dr's 12.8 at 111 w/ 75 shot |
|
|
 |
|
|