MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 08-26-2004, 09:15 AM   #6
crazypete
Registered Member
 
crazypete's Avatar
 
Join Date: Sep 2002
Location: Boston
Posts: 592
Default

Ponyexpress:

The torque converter IS the fluid coupling. Of course, the exact same problem can be caused by an old AOD with worn clutches. The clutches grind down and then slip all the time, devastating performance and mileage at the same time. The only way to tell the two apart is that a bad converter will trash your city mileage and leave your highway milage the same but bad clutches will give you across the board terrible mileage. The guys at the local yard said that if you burn clutches long enough (like not hooking up your TV cable), the car will basically neutral all the time since nothing is able to transmit power to anything else. Rebuilding an AOD is easy enough but it is messy and that damn thing is HEAVY. I rebuilt an AOD on my first try never even having seen one before I bought a used one from a yard. It's just stacking things up and dealing with a few snaprings. Rebuild kit is less than $100.

Tincan:

Is your highway milage (or performance in 3rd/4rth) much better than 1rst/2nd and city mileage. That is a sign that it IS your TC. If it sucks all the way around, I would say it is the clutches in the transmission. Since it doesnt vibrate on the highway, I would say that it is most likely the TC since you have a direct connection bypassing the TC sorta in 3rd and totally in 4rth.
__________________
91 GT Carb conversion, holley 600 double pumper, edelbrock performer intake, FMS "C" drop springs, march 1000 underdrive pullies, crane 1.7 roller rockers, GT-40P headers, bassani x pipe, american thunder catback, FMS 4.56's, msd aL6, trunkmount battery, A/C eliminator kit, 3000 stall tci streetfighter, AOD with transgo kit, A+ servo, 300M hardened lockup shaft, kevlar bands and 28,000 gvw trans cooler, 3 core radiator, 300 lbs stripped with a full interior
crazypete is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
B&M holeshot or performance automotive torque converter? crazypete Windsor Power 13 05-07-2004 01:42 PM
Another "which stall speed conv" thread! crazypete Windsor Power 8 10-10-2003 02:45 AM
cat converter f8tlbyte Small Ponies 7 04-04-2003 09:32 AM


All times are GMT -5. The time now is 05:32 PM.


SEARCH