

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
![]() |
#1 |
Registered Member
Join Date: May 1999
Posts: 5,246
|
![]() The 255 will create additional strain on the fuel pressure regulator. It will also create hot running conditions on the pump itself, making it more prone to premature failure. Mostly due to the stock fuel system being unable to flow the 255lph properly, thus creating more resistance to the pump in the lines. This would especially be the case when the tank is low on fuel. Extra heat from the pump working harder, along with low fuel that isn't cooling the pump properly could significantly shorten the life of the pump. There is also an additional drain on your electrical system. Not a big deal, but it's there.
They did an article on this years ago in Muscle Mustang and Fast Fords. By the way, the stock 88lph-92lph pump will safely support about 260hp. A 110lph for up to about 300hp, 155 will allow you to do over 400hp, and a 190lph should be okay for 500. Now that's all naturally aspirated, if you go forced induction, you may want a little more. |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fuel Pump Problems | blue302 | Windsor Power | 3 | 07-08-2005 10:18 PM |
Fuel Pump? | Dean Malaxos | Small Ponies | 3 | 02-09-2004 02:52 PM |
Will Stock Regulator work w/155lph Fuel Pump?? | RMARIANI | Windsor Power | 4 | 04-26-2002 06:50 PM |
4cyl fuel pump ?'s | Coupe Devil | Windsor Power | 1 | 09-25-2001 04:23 PM |
Fuel Pump Replacement | KobraLX | Windsor Power | 1 | 07-31-2001 12:44 PM |