Bypassing Smog Pump

Scrapla · 10-26-2004, 10:39 PM

Yea I was hoping I wouldnt have to weld I really want to do it in my driveway but thanks

westridez · 10-26-2004, 11:21 PM

Quote:

Originally Posted by Scrapla

Yea I was hoping I wouldnt have to weld I really want to do it in my driveway but thanks

when i did the pipes on the back of the heads for the polution i took the pipe off and cut them and put them in a vise and crimped it shut and it dont leak so if you could find something to crimp it instead you would'nt have to weld

crazypete · 10-27-2004, 07:10 AM

Here's a better idea that is reversible:

Take the air pump tube and hack off a few inches at the end. Pound one end flat and fold it over and stuff rtv inside it to seal that end then slide this onto the h-pipe's tube and clamp it as an endcap. This way, you can simply pull the cap off later if you need your air tube.

Scrapla · 10-27-2004, 11:39 AM

Good idea thanks guys

10-26-2004, 10:39 PM	#1
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	Re: Bypassing Smog Pump Yea I was hoping I wouldnt have to weld I really want to do it in my driveway but thanks __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73

10-27-2004, 07:10 AM	#3
crazypete Registered Member Join Date: Sep 2002 Location: Boston Posts: 592	Re: Bypassing Smog Pump Here's a better idea that is reversible: Take the air pump tube and hack off a few inches at the end. Pound one end flat and fold it over and stuff rtv inside it to seal that end then slide this onto the h-pipe's tube and clamp it as an endcap. This way, you can simply pull the cap off later if you need your air tube. __________________ 91 GT Carb conversion, holley 600 double pumper, edelbrock performer intake, FMS "C" drop springs, march 1000 underdrive pullies, crane 1.7 roller rockers, GT-40P headers, bassani x pipe, american thunder catback, FMS 4.56's, msd aL6, trunkmount battery, A/C eliminator kit, 3000 stall tci streetfighter, AOD with transgo kit, A+ servo, 300M hardened lockup shaft, kevlar bands and 28,000 gvw trans cooler, 3 core radiator, 300 lbs stripped with a full interior

10-27-2004, 11:39 AM	#4
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	Re: Bypassing Smog Pump Good idea thanks guys __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
smog pump delete	89droptop	Windsor Power	11	03-15-2010 04:01 PM
bypassing the smog pump	bigred90gt	Windsor Power	2	12-23-2002 10:58 AM
Bypassing smog pump?	Scrapla	Windsor Power	2	11-19-2002 07:53 AM
PLEASE HELP!! Do I need the smog pump system to pass dyno emissions ??	Stang_ROTY	Windsor Power	5	07-02-2001 01:09 AM
Bypassing the smog pump?	302GT	Windsor Power	2	01-03-2001 11:27 AM