306 or 347?

~The Jester~ · 02-16-2005, 09:58 PM

Quote:

Originally Posted by Zack87GT

Hey Jester, i will be running a similiar combo.. but different heads (AFR 185,s) What are the specs of your cam... i am just wondering if you could let me know.. still waiting to get email back from cam motion..

Which specs? The 333 or the 408? Got 2 cars (building #3 as we speak) Car#1 the 333. is "mild" and I'd have to look up the specs for ya, don't remember them off the top of my head. She's running a sold cam though, for sure. AFR 185's are close, that motor has Canfield with 200cc intake runners. Should be pretty good comparison though. I'll dig up the cam specs on that one.

Car #2, 410" Windsor engine, 1-off Canfield's (I know the owner!

) Cam Motion solid roller cam, .647/.622 lift 252/259 duration, and alllllllll the goodies below that. Still in progress.

Car #3, 393" Windsor "budget stroker". Meaning custom crank, stock 351 rods, stock 302 forged pistons. This is the "How fast can ya go on stock parts?" car. Should be lots of fun though!

Zack87GT · 02-16-2005, 11:21 PM

Thanks Jester.. whenever you get a chance to dig those specs up. I got an email back from cam motion.. and the specs they gave me for a 331 was actually pretty close to the specs of the stage 3 trick flow cam.. I was surprised!! I think they gave me .576/.584 w/ duration at 238/241 and 110 ls. so it almost the same specs.. Oh one more question for you.. what is your compression ratio on the 331(333)?

~The Jester~ · 02-20-2005, 06:51 AM

CR on the 333 is 11.5:1 and the cam specs are almost the same as the trick flow stage III. Lift is up around 585/590 and duration is like 259/257 so the stage III is real close to what Cam motion ground for us.

Sounds like you're on your way to a kickass stroker there bro!

Zack87GT · 03-05-2005, 11:54 AM

Well my 331 stroker kit is on the way along with a Victor Jr. intake. The Afr 185 heads are also on the way.. and i have decided to go with a cam from comp cams.. xe282hr .565/.574 282/ 290 duration.
so we will see if i can make the 450- 475 hp mark at the flywheel.It should be built and dynoed in a month!!

fiveOguy20 · 03-16-2005, 02:32 AM

sounds good man, it should run real strong. altho i will say im runnin gt-40 heads an the "outdated" xcam and am still runnin high 11's, with the factory fuel pump

.. so u should be able to hit ur goal.

03-05-2005, 11:54 AM	#4
Zack87GT Registered Member Join Date: Jan 2005 Posts: 33	Re: 306 or 347? Well my 331 stroker kit is on the way along with a Victor Jr. intake. The Afr 185 heads are also on the way.. and i have decided to go with a cam from comp cams.. xe282hr .565/.574 282/ 290 duration. so we will see if i can make the 450- 475 hp mark at the flywheel.It should be built and dynoed in a month!!

03-16-2005, 02:32 AM	#5
fiveOguy20 Registered Member Join Date: Sep 2002 Posts: 156	Re: 306 or 347? sounds good man, it should run real strong. altho i will say im runnin gt-40 heads an the "outdated" xcam and am still runnin high 11's, with the factory fuel pump .. so u should be able to hit ur goal. __________________ 347- ported X heads, Xcam , RPM air-gap intake, 650 holley DP, 10:5 comp., equal lenght shorties, pullies, MSD ignition, pro 5.0 shifter. stock fuel system !! best ET: 11.95 @113 1.64 60 foots

02-16-2005, 11:21 PM	#2
Zack87GT Registered Member Join Date: Jan 2005 Posts: 33	Re: 306 or 347? Thanks Jester.. whenever you get a chance to dig those specs up. I got an email back from cam motion.. and the specs they gave me for a 331 was actually pretty close to the specs of the stage 3 trick flow cam.. I was surprised!! I think they gave me .576/.584 w/ duration at 238/241 and 110 ls. so it almost the same specs.. Oh one more question for you.. what is your compression ratio on the 331(333)?

02-20-2005, 06:51 AM	#3
~The Jester~ Rat Killer Join Date: Aug 2002 Location: Cold ass Ohio Posts: 1,143	Re: 306 or 347? CR on the 333 is 11.5:1 and the cam specs are almost the same as the trick flow stage III. Lift is up around 585/590 and duration is like 259/257 so the stage III is real close to what Cam motion ground for us. Sounds like you're on your way to a kickass stroker there bro! __________________ d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply.....