HARTMAN VALVE COVERS ARE JUNK NEED TO KNOW WHAT I NEED TO GRIND OFF STOCK

[Rick 91GT]

They are the same as the Comp Polymer, I ran them for about 2 years and at the very end they started to leak. You need to use cork gaskets with a very thin layer of RTV and they will not leak. If you use the stock re-enforced gaskets they will leak, no or not.

As for the stockers, you need to grind away the oil baffle to get them to work with the 1.7's, it is a lot of grinding.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension, SPEC stage III clutch, Lakewood SFI bell, S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!
[b]12.16 @ 113.5, 1.78 60ft..no traction in the 90 degree