306 or 347?

~The Jester~ · 02-20-2005, 06:51 AM

CR on the 333 is 11.5:1 and the cam specs are almost the same as the trick flow stage III. Lift is up around 585/590 and duration is like 259/257 so the stage III is real close to what Cam motion ground for us.

Sounds like you're on your way to a kickass stroker there bro!

Zack87GT · 03-05-2005, 11:54 AM

Well my 331 stroker kit is on the way along with a Victor Jr. intake. The Afr 185 heads are also on the way.. and i have decided to go with a cam from comp cams.. xe282hr .565/.574 282/ 290 duration.
so we will see if i can make the 450- 475 hp mark at the flywheel.It should be built and dynoed in a month!!

fiveOguy20 · 03-16-2005, 02:32 AM

sounds good man, it should run real strong. altho i will say im runnin gt-40 heads an the "outdated" xcam and am still runnin high 11's, with the factory fuel pump

.. so u should be able to hit ur goal.

02-20-2005, 06:51 AM	#1
~The Jester~ Rat Killer Join Date: Aug 2002 Location: Cold ass Ohio Posts: 1,143	Re: 306 or 347? CR on the 333 is 11.5:1 and the cam specs are almost the same as the trick flow stage III. Lift is up around 585/590 and duration is like 259/257 so the stage III is real close to what Cam motion ground for us. Sounds like you're on your way to a kickass stroker there bro! __________________ d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply.....

03-05-2005, 11:54 AM	#2
Zack87GT Registered Member Join Date: Jan 2005 Posts: 33	Re: 306 or 347? Well my 331 stroker kit is on the way along with a Victor Jr. intake. The Afr 185 heads are also on the way.. and i have decided to go with a cam from comp cams.. xe282hr .565/.574 282/ 290 duration. so we will see if i can make the 450- 475 hp mark at the flywheel.It should be built and dynoed in a month!!

03-16-2005, 02:32 AM	#3
fiveOguy20 Registered Member Join Date: Sep 2002 Posts: 156	Re: 306 or 347? sounds good man, it should run real strong. altho i will say im runnin gt-40 heads an the "outdated" xcam and am still runnin high 11's, with the factory fuel pump .. so u should be able to hit ur goal. __________________ 347- ported X heads, Xcam , RPM air-gap intake, 650 holley DP, 10:5 comp., equal lenght shorties, pullies, MSD ignition, pro 5.0 shifter. stock fuel system !! best ET: 11.95 @113 1.64 60 foots