*WANTED*-advice on mod. procedure?

fiveohpatrol · 09-15-2001, 12:44 AM

hmm, 2,000 sounds like alot but when you start adding stuff up it wont get you extrememly far, a good tune up (which you definately need with those miles) will probably run you $100 or so, then I'd do gears and exhaust, gears installed will be about $400, then exhaust (self installed) with headers/off road h-pipe/catback = about $450, subframes $110 + $20 for a muffler shop to weld em up, you'll probably want a new radiator with your mileage so a pep boys 3 row (which they raised the price on!) is about $140 now, still not a bad price for what you get, pulleys are definately in there, ASP's are like $80, oh yah you said tires didnt you, uhh theres no one tire thats better than all the rest, but i like drag radials so for the back (im assuming you have 15X7 turbines, correct?) i think BFG has some 235/60 15s that would be fine, for the front, if dont really care about taking corners at 90mph or going 160 then you dont need anything really nice, id say about $450 in a set of tires , so the grand total here so far is about $1300
hey we've got $700 to play with

lets see, you could get a set of welds or other light wheels, or maybe control arms, 1.7RR's, bigger MAF and TB
after all this you should be running mid-high 13's or so maybe a little slower because your engine has quite a few miles on it, it also depends heavily on the sea level of your track/weather and how good of a driver you are
sorry i wrote so much, i, like kevin, love these questions, its like getting to do it all over again,

------------------
88 Notch, B&M Ripper, 3.73's, Ported E7's, Explorer int. w/ ported lower, pulleys, 1.7RR's, BBK headers, off-road H-pipe, flowmasters, subframes, 65mm TB, March ram air ,MSD coil, U/L control arms, 155lph f/p, Crane Adj.FPR, Nitto drag radials, best 1/4--> 13.76@101.4 on a 2.17 60ft

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
eibach advice needed	mustardjohn	Small Ponies	6	08-19-2012 08:12 PM
Advice on injectors...PKRWUD I'd like your advice on this one as well	silver_pilate	Windsor Power	3	06-09-2003 08:59 AM
Help!! Need some Advice and pickmeups!!	SxyRedStang	Blue Oval Lounge	13	10-23-2001 03:02 AM
Bolt on Performance Advice	aurilius_maximus	Modular Madness	4	10-29-2000 11:23 AM

09-15-2001, 12:44 AM	#6
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	hmm, 2,000 sounds like alot but when you start adding stuff up it wont get you extrememly far, a good tune up (which you definately need with those miles) will probably run you $100 or so, then I'd do gears and exhaust, gears installed will be about $400, then exhaust (self installed) with headers/off road h-pipe/catback = about $450, subframes $110 + $20 for a muffler shop to weld em up, you'll probably want a new radiator with your mileage so a pep boys 3 row (which they raised the price on!) is about $140 now, still not a bad price for what you get, pulleys are definately in there, ASP's are like $80, oh yah you said tires didnt you, uhh theres no one tire thats better than all the rest, but i like drag radials so for the back (im assuming you have 15X7 turbines, correct?) i think BFG has some 235/60 15s that would be fine, for the front, if dont really care about taking corners at 90mph or going 160 then you dont need anything really nice, id say about $450 in a set of tires , so the grand total here so far is about $1300 hey we've got $700 to play with lets see, you could get a set of welds or other light wheels, or maybe control arms, 1.7RR's, bigger MAF and TB after all this you should be running mid-high 13's or so maybe a little slower because your engine has quite a few miles on it, it also depends heavily on the sea level of your track/weather and how good of a driver you are sorry i wrote so much, i, like kevin, love these questions, its like getting to do it all over again, ------------------ 88 Notch, B&M Ripper, 3.73's, Ported E7's, Explorer int. w/ ported lower, pulleys, 1.7RR's, BBK headers, off-road H-pipe, flowmasters, subframes, 65mm TB, March ram air ,MSD coil, U/L control arms, 155lph f/p, Crane Adj.FPR, Nitto drag radials, best 1/4--> 13.76@101.4 on a 2.17 60ft