poor dyno numbers from 408 :(

7DMACH1 · 04-14-2005, 11:07 PM

Here's where I found it. Ray
http://www.compcams.com/Technical/Cu...HTML/62-65.asp

rwhite65 · 04-15-2005, 12:25 AM

I appreciate the help, but the cam card I have has a 35 prefix, so as I understand the replies that would mean I need the late style firing order??
Ryan

andy669 · 04-15-2005, 07:02 AM

If the firing order was wrong, you would hear it. Plus, if that thing made 300 horses on only 4 cylinders? Holy shit! That thing would be a monster. 1-2-6-8 will still fire correctly either way. Good thought, but I dont think thats the problem.

It could very well be something timing related. 15 degrees of timing was worth exactly 100 horsepower in my car.

Andy

rwhite65 · 04-15-2005, 09:19 AM

I really think it is going to be the timing. I have just gotten busy with work here (begining of my work week) and have not had time to put the advancement pieces back in.

I am hoping tomorrow to put it together correctly, which should give me atleast 20 more degrees total advancement (give or take a few). Will post when we do it.
Ryan

andy669 · 04-17-2005, 07:33 PM

Heres a couple of my dyno pulls.

Andy

rwhite65 · 04-17-2005, 08:29 PM

Andy669,
thanks for posting that....gonna be a few days before the car can do a pull again......see the other post.

Ryan

rwhite65 · 05-08-2005, 03:28 PM

Well, the thing feels tons better since we have played with timing and fixed the broken timing chain cover

The big rear tires dont seem big at all on this car.

I think a dyno is gonna show it is falling sooner then it should. Around 5,000 5,500 she still falls off. I believe the cam is designed to pull to 6,500. I am kinda thinking the high volume carter fuel pump (mechanical) may not be able to keep up at the higher rpms. Any thoughts?
Ryan

04-14-2005, 11:07 PM	#1
7DMACH1 Registered Member Join Date: Nov 2001 Location: PHILA. PA USA Posts: 469	Re: poor dyno numbers from 408 :( Here's where I found it. Ray http://www.compcams.com/Technical/Cu...HTML/62-65.asp

04-15-2005, 12:25 AM	#2
rwhite65 Ride Hard Join Date: Oct 2000 Location: Wyoming IL Posts: 1,094	Re: poor dyno numbers from 408 :( I appreciate the help, but the cam card I have has a 35 prefix, so as I understand the replies that would mean I need the late style firing order?? Ryan __________________ 65 Fastback 91 roller 306, H/C/I AOD-Bauman, PI Stallion, 4.10's and traction loc 04 Grand Cherokee Freedom Edition 79 Ford F-250 4x4 - Restored

04-15-2005, 07:02 AM	#3
andy669 Registered Member Join Date: Jan 2001 Location: Moline Il Posts: 901	Re: poor dyno numbers from 408 :( If the firing order was wrong, you would hear it. Plus, if that thing made 300 horses on only 4 cylinders? Holy shit! That thing would be a monster. 1-2-6-8 will still fire correctly either way. Good thought, but I dont think thats the problem. It could very well be something timing related. 15 degrees of timing was worth exactly 100 horsepower in my car. Andy __________________ 88 coupe 91 LX NMRA Pure Street 5120

04-15-2005, 09:19 AM	#4
rwhite65 Ride Hard Join Date: Oct 2000 Location: Wyoming IL Posts: 1,094	Re: poor dyno numbers from 408 :( I really think it is going to be the timing. I have just gotten busy with work here (begining of my work week) and have not had time to put the advancement pieces back in. I am hoping tomorrow to put it together correctly, which should give me atleast 20 more degrees total advancement (give or take a few). Will post when we do it. Ryan __________________ 65 Fastback 91 roller 306, H/C/I AOD-Bauman, PI Stallion, 4.10's and traction loc 04 Grand Cherokee Freedom Edition 79 Ford F-250 4x4 - Restored

04-17-2005, 08:29 PM	#6
rwhite65 Ride Hard Join Date: Oct 2000 Location: Wyoming IL Posts: 1,094	Re: poor dyno numbers from 408 :( Andy669, thanks for posting that....gonna be a few days before the car can do a pull again......see the other post. Ryan __________________ 65 Fastback 91 roller 306, H/C/I AOD-Bauman, PI Stallion, 4.10's and traction loc 04 Grand Cherokee Freedom Edition 79 Ford F-250 4x4 - Restored

05-08-2005, 03:28 PM	#7
rwhite65 Ride Hard Join Date: Oct 2000 Location: Wyoming IL Posts: 1,094	Re: poor dyno numbers from 408 :( Well, the thing feels tons better since we have played with timing and fixed the broken timing chain cover The big rear tires dont seem big at all on this car. I think a dyno is gonna show it is falling sooner then it should. Around 5,000 5,500 she still falls off. I believe the cam is designed to pull to 6,500. I am kinda thinking the high volume carter fuel pump (mechanical) may not be able to keep up at the higher rpms. Any thoughts? Ryan __________________ 65 Fastback 91 roller 306, H/C/I AOD-Bauman, PI Stallion, 4.10's and traction loc 04 Grand Cherokee Freedom Edition 79 Ford F-250 4x4 - Restored

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
casting numbers	Sheldon	Built Ford Tough	5	08-21-2002 05:58 PM
Powerdyne Dyno numbers and continuing frustration	1995MGTS	Windsor Power	17	03-31-2002 12:59 PM
How are these oil pressure numbers?	88COBRA	Windsor Power	3	02-26-2002 01:02 PM
Numbers from leakdown test	exgmguy	Windsor Power	8	10-04-2001 08:32 PM
Intake Flow Numbers? anyone have them	NewAge 5.0	Windsor Power	0	09-25-2001 12:05 PM