spark plug wire question

[GhettoPop]

Originally Posted by Jaber10

the end that goes on the spark plug is str8 and i have hooker super competition headers....so the boot touches and it doesnt look like there is any way around it

let me know if you have ne ideas

James

if the wire touches the header its toast. i believe you said header touching is only a problem with one wire. i would either:

buy a 90 degree boot from msd, cut the straight boot off, and crimp on the new one

or

if you dont wont to crimp of the wire might end up being too short after u alter it, just call up msd and buy a single wire of the correct length and a 90 degree boot

good luck