Installing a WIndow Regulator

[Kisner]

It's been a few years since I removed and installed my windows but if my memory serves me correctly, you need to remove the window stops on each side before you can raise it high enough to get the other roller out. There's one on the right (front part of the door) and I believe one on the left (rear part of the door). If I remember correctly, I had to have the window rolled down just enough to see the right hand stop through one of the round holes in the door to remove it. The one on the left I believe I removed through the back of the door (had to remove the rubber seal on the top back of the door). I think there's 3 small screws holding the window to the track and I had a heck of time getting one out also. Kept spraying WD-40 on it and tapping it and it finally gave way. If you can't locate the stops I'll try to find a diagram.