steering wheel pt2

gold68fastback · 05-26-2005, 09:56 PM

sorry about reposting this but i finally figured out how to upload a picture of the steering wheel that i am trying to replace, i went to californiamustangs.com and they only had the steering wheel the coupe had some how i guess i got a different one maybe it is going to be impossible to find

KiltedBanshees93GT · 05-27-2005, 08:20 AM

Don't get discouraged. I would check NPD first. maybe mustangpartshouse second. They seem to have more of the oddball stuff. Beyond that, there are literally hundreds of companies out there that handle classic stangs, plus swap meets, classifieds, and of course, old fashioned networking.

Trust me, you can find ANY part with patience and perseverance.

J

Phillyfanfrombirth · 05-30-2005, 02:57 AM

I guess I can't tell by the pic... but isn't that the standard 2 spoke steering wheel with a broken horn ring?

CJs should carry all of that stuff... when I got my 68, I only had the wheel. I had to pick up the pad (from their junkyard it ran $40), the horn ring, and all of the trim... In total I spent about $150 for everything...

I think that they even restore used steering wheels...

Check them out:

www.emustang.com

Phillyfanfrombirth · 05-30-2005, 03:14 AM

STW5I was the part number for an ivory gold 68-69 steering wheel on CJ's website... it ran $149.99.

Now, I would note that would be for the steering wheel alone.

05-27-2005, 08:20 AM	#2
KiltedBanshees93GT Registered Member Join Date: Jun 2000 Location: Pigeon Forge Tn Posts: 611	Re: steering wheel pt2 Don't get discouraged. I would check NPD first. maybe mustangpartshouse second. They seem to have more of the oddball stuff. Beyond that, there are literally hundreds of companies out there that handle classic stangs, plus swap meets, classifieds, and of course, old fashioned networking. Trust me, you can find ANY part with patience and perseverance. J __________________ ____________ '66 Mustang Coupe- AKA "Lenore" on disability for a (long) bit '93 GT Mostly stock AKA "Fawkes" Rice Haters Club Member #239 "I find your lack of faith...disturbing." "Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats." H. L. Mencken

05-30-2005, 02:57 AM	#3
Phillyfanfrombirth Registered Member Join Date: Dec 2004 Location: South Central PA Posts: 358	Re: steering wheel pt2 I guess I can't tell by the pic... but isn't that the standard 2 spoke steering wheel with a broken horn ring? CJs should carry all of that stuff... when I got my 68, I only had the wheel. I had to pick up the pad (from their junkyard it ran $40), the horn ring, and all of the trim... In total I spent about $150 for everything... I think that they even restore used steering wheels... Check them out: www.emustang.com

05-30-2005, 03:14 AM	#4
Phillyfanfrombirth Registered Member Join Date: Dec 2004 Location: South Central PA Posts: 358	Re: steering wheel pt2 STW5I was the part number for an ivory gold 68-69 steering wheel on CJ's website... it ran $149.99. Now, I would note that would be for the steering wheel alone.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Steering Wheel	Harry	Windsor Power	0	05-14-2004 03:32 PM
turn signal-maybe the whole harness-calling all electricians?	rwhite65	Classic Mustangs	6	07-25-2003 08:40 AM
Steering Wheel Swap	mw2934	Windsor Power	5	09-20-2002 06:02 AM
68 mustang steering wheel swap	msb2426	Classic Mustangs	1	06-02-2002 08:24 AM
Steering wheel swap?	Mustangbelle306	Windsor Power	0	12-10-2001 02:14 AM