wanting to make 350 to 400 hp from 351w any Ideas?

johnwb · 08-15-2005, 03:14 PM

Thank you,any idea what windsors came with larger valves?

82 GT · 08-15-2005, 06:42 PM

The '69-70 351w heads have 1.94/1.60 valves but it takes some searching to find some.

rwhite65 · 08-15-2005, 09:18 PM

Rev had a set for sale that I think had even maybe been ported some. Look him up.
Ryan

82 GT · 08-16-2005, 12:04 AM

If I could do it all over again, I would spend money on a set of good heads first and then buy cam, intake, etc.....

~The Jester~ · 08-16-2005, 09:11 AM

Quote:

Originally Posted by 82 GT

The '69-70 351w heads have 1.94/1.60 valves but it takes some searching to find some.

I got TWO sets of them. One needs gone over BAD, the other set would prolly bolt on and go, although I'd get them checked out to be safe.

Good sized valves, decent ports, lots of meat for extra porting.

350-400 HP is an easy task on that Windsor without spending a zillion dollars. Find yourself a set of Dart Windsor Sr. heads (iron) usually around $700 ready to go. KILLER iron heads. Throw in an F303 cam, Torker II intake, 650 Holley and you're there!

08-15-2005, 03:14 PM	#1
johnwb 88lx work in progress Join Date: Jul 2005 Location: canada Posts: 62	Re: wanting to make 350 to 400 hp from 351w any Ideas? Thank you,any idea what windsors came with larger valves?

08-15-2005, 06:42 PM	#2
82 GT Import Slayer Join Date: May 1999 Posts: 2,241	Re: wanting to make 350 to 400 hp from 351w any Ideas? The '69-70 351w heads have 1.94/1.60 valves but it takes some searching to find some. __________________ '82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator.

08-15-2005, 09:18 PM	#3
rwhite65 Ride Hard Join Date: Oct 2000 Location: Wyoming IL Posts: 1,094	Re: wanting to make 350 to 400 hp from 351w any Ideas? Rev had a set for sale that I think had even maybe been ported some. Look him up. Ryan __________________ 65 Fastback 91 roller 306, H/C/I AOD-Bauman, PI Stallion, 4.10's and traction loc 04 Grand Cherokee Freedom Edition 79 Ford F-250 4x4 - Restored

08-16-2005, 12:04 AM	#4
82 GT Import Slayer Join Date: May 1999 Posts: 2,241	Re: wanting to make 350 to 400 hp from 351w any Ideas? If I could do it all over again, I would spend money on a set of good heads first and then buy cam, intake, etc..... __________________ '82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
351W crankcase evacuation	jse9	Windsor Power	19	09-03-2004 12:00 AM
351W heads on 289 stock engine	sleeperstang	Classic Mustangs	5	11-21-2002 08:35 PM
Where to find 351W SVO	GodStang	Windsor Power	0	10-11-2002 02:04 PM
351W in a Fox body	greydan	Windsor Power	4	07-03-2002 02:33 PM
HP #'s from a built 351W versus FMS 351 versus stroker	stroker393	Windsor Power	0	03-09-2001 10:24 AM