mind bender 5.0

mudchucker · 09-23-2005, 02:32 PM

Quote:

Originally Posted by BLACK85GT

I dont have any experience with the ECM, I just use MSD ignition on mine. Some one who has done this conversion over to mass air could probably chime in here.
But if the ECM is from a H.O. motor then it should work with the H.O. cam. (E cam is an H.O. cam).
The heads dont really matter. Any heads will work. The lifters just follow the cam anyways.

Thanks for all the help BLACK85GT!!

rwhite65 · 09-24-2005, 10:07 PM

Keep in mind that there are Ford Roller cams out there that run the old firing order also. I ran into this with my remanufactured engine. These cams are not the H.O. cam obviously, but this may be part of ur problem.
Ryan

09-24-2005, 10:07 PM	#2
rwhite65 Ride Hard Join Date: Oct 2000 Location: Wyoming IL Posts: 1,094	Re: mind bender 5.0 Keep in mind that there are Ford Roller cams out there that run the old firing order also. I ran into this with my remanufactured engine. These cams are not the H.O. cam obviously, but this may be part of ur problem. Ryan __________________ 65 Fastback 91 roller 306, H/C/I AOD-Bauman, PI Stallion, 4.10's and traction loc 04 Grand Cherokee Freedom Edition 79 Ford F-250 4x4 - Restored

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sorry never mind	fordkid68	Classic Mustangs	0	11-21-2002 08:04 PM
Hey turbo guys, make up my mind	347powered	Windsor Power	1	03-01-2002 08:50 PM
Im doing AOD to T-5 swap, any helpfull info / things to keep in mind would be great	zepherman	Windsor Power	4	09-26-2001 01:21 PM
can not make up my mind need your help	joey50gt	Windsor Power	3	05-01-2001 12:42 AM
Car starts and wont start, will it make up its mind?	89FHPLX	Windsor Power	5	01-14-2001 02:37 AM