Quick advice before I put my engine back together

Dark_5.0 · 11-04-2005, 09:47 AM

Sounds like you had a leak between the lower intake and the head.

Silicone the intake gasket in place on the head and let it dry then place the lower intake on and follow the proper torque sequence and torque.

NitroNixon · 11-04-2005, 09:52 AM

Thanks for the response, that's what I was beginning to think because I didn't see anything wrong with the head gaskets when I pulled them up. It's only be around 4000 miles since I installed new head gaskets about 6 months ago.

So you suggest that I let the lower intake gasket sit overnight before I before I place the lower intake onto the heads?

NitroNixon · 11-04-2005, 10:04 AM

also, would that cause my radiator to leak from the cap?

~The Jester~ · 11-04-2005, 04:46 PM

Quote:

Originally Posted by NitroNixon

also, would that cause my radiator to leak from the cap?

Nope! But a head gasket would.

Sounds to me like a head gasket, even though you couldn't "see" it.

As far as the milkshake under the valve cover, check your PCV valve, could have a bit to do with the head gasket as well.

11-04-2005, 09:47 AM	#1
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Re: Quick advice before I put my engine back together Sounds like you had a leak between the lower intake and the head. Silicone the intake gasket in place on the head and let it dry then place the lower intake on and follow the proper torque sequence and torque. __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

11-04-2005, 09:52 AM	#2
NitroNixon Registered Member Join Date: Mar 2002 Location: DC Posts: 129	Re: Quick advice before I put my engine back together Thanks for the response, that's what I was beginning to think because I didn't see anything wrong with the head gaskets when I pulled them up. It's only be around 4000 miles since I installed new head gaskets about 6 months ago. So you suggest that I let the lower intake gasket sit overnight before I before I place the lower intake onto the heads? __________________ 87 GT As of 2/1/06 650 DP Carb Crosswind Intake Edelbrock Performer Heads 97 Explorer Bottomend w/ B-303 Cam 1.7 Roller Rockers Flowtech Longtube Headers Flowtech H-Pipe MSD Black Wires MSD ignition MSD Distributor Blaster 3 Coil Electric Fan Underdrive Pullies T5 Trans Hurst Shifter Lowered 1.5" 373 Gears

11-04-2005, 10:04 AM	#3
NitroNixon Registered Member Join Date: Mar 2002 Location: DC Posts: 129	Re: Quick advice before I put my engine back together also, would that cause my radiator to leak from the cap? __________________ 87 GT As of 2/1/06 650 DP Carb Crosswind Intake Edelbrock Performer Heads 97 Explorer Bottomend w/ B-303 Cam 1.7 Roller Rockers Flowtech Longtube Headers Flowtech H-Pipe MSD Black Wires MSD ignition MSD Distributor Blaster 3 Coil Electric Fan Underdrive Pullies T5 Trans Hurst Shifter Lowered 1.5" 373 Gears

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Engine Oiling Problem	sleeperstang	Windsor Power	14	12-18-2004 11:45 AM
which NOS kit need advice quick	302crew	Windsor Power	11	10-25-2002 08:02 PM
Time to go back to school.	Unit 5302	Modular Madness	12	04-27-2002 03:46 PM
Rebuilding an engine.. and then some	Halz	Windsor Power	5	04-01-2002 02:01 AM
Last minute engine dressup and other quick questions before car show... PLEASE HELP!!	WA2FAST	Windsor Power	1	08-09-2001 12:44 PM