What could be causing this?

fiveohpatrol · 12-06-2005, 07:12 PM

Ah, I didn't realize you had a Novi on there. The bigger PS pulley would probably help a ton, and is only like $10 new at the dealer.

Chris_H · 12-08-2005, 10:18 PM

I went back outside today and was able to squeeze my camera down in low enough to get a picture of the crank and the water pump pulley's. Looks as if the 2 are rubbing each other still. I guess that leaves me with a few options, none of which will be cheap:

1.) Take the 8" crank pulley to the machine shop and have them make it smaller, or just make a smaller one for me.

2.) Take the water pump pulley down and have them make me a smaller one (it's a 93 Cobra water pump pulley)

3.) Look into getting an electric water pump and fan.

~The Jester~ · 12-08-2005, 11:44 PM

March underdrives. Crank pulley will be smaller.

Chris_H · 12-09-2005, 06:56 AM

Quote:

Originally Posted by ~The Jester~

March underdrives. Crank pulley will be smaller.

I bought the 8" so I would have more boost. I would hate to go back to a smaller crank pulley. If I went smaller, it would be a 7 3/4" pulley.

12-06-2005, 07:12 PM	#1
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	Re: What could be causing this? Ah, I didn't realize you had a Novi on there. The bigger PS pulley would probably help a ton, and is only like $10 new at the dealer. __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

12-08-2005, 10:18 PM	#2
Chris_H Registered Member Join Date: Oct 1999 Location: New Mexico Posts: 488	Re: What could be causing this? I went back outside today and was able to squeeze my camera down in low enough to get a picture of the crank and the water pump pulley's. Looks as if the 2 are rubbing each other still. I guess that leaves me with a few options, none of which will be cheap: 1.) Take the 8" crank pulley to the machine shop and have them make it smaller, or just make a smaller one for me. 2.) Take the water pump pulley down and have them make me a smaller one (it's a 93 Cobra water pump pulley) 3.) Look into getting an electric water pump and fan. __________________ 1987 LX, Best times: 13.47 @ 102.49, 1.80 60ft 6900' DA

12-08-2005, 11:44 PM	#3
~The Jester~ Rat Killer Join Date: Aug 2002 Location: Cold ass Ohio Posts: 1,143	Re: What could be causing this? March underdrives. Crank pulley will be smaller. __________________ d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply..... Last edited by ~The Jester~; 12-09-2005 at 05:27 AM..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Headlights causing a stumble.	jimberg	Windsor Power	8	10-21-2005 08:49 AM
New TB causing probs	stangGT95	Windsor Power	0	06-01-2004 09:13 PM
Rev limiter or VSS, what is causing this problem!!!	moponys	Windsor Power	6	10-28-2003 12:49 AM
what could be causing this	onefastlx420	Windsor Power	4	12-26-2001 10:46 PM
AAAARGH! Steeda timing adjuster causing computer problems!!!	bark3rd	Modular Madness	1	06-04-2001 08:15 PM