O2 sensor help...

Joel5.0 · 01-07-2006, 09:28 PM

Quote:

Originally Posted by Hozer 88GTConv

Joel,
tx for the reply. Do you have a link to the pcm harness schematic? I am trying to find one now online and in my references...

found it, looks like pin 49 ego ground
43 ego l
29 ego r
I'll be looking for a 5.5vdc-ish signal at the computer.
tx

Yup....those are the pins. Don't forget to do the scan though. GL

Hozer 88GTConv · 01-07-2006, 09:54 PM

don't have an analog meter, so looks like I'll have to fix the check engine light or find a analog meter...
damn, always something...

Joel5.0 · 01-07-2006, 10:20 PM

You don't have to fix your CEL....use a 12v test light or LED. Check the next diagram on how to set it up.

GL

01-07-2006, 09:54 PM	#2
Hozer 88GTConv Registered Member Join Date: Feb 2002 Location: Jacksonville, FL Posts: 706	Re: O2 sensor help... don't have an analog meter, so looks like I'll have to fix the check engine light or find a analog meter... damn, always something... __________________ 1988 GT Convertible 331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta... One week with new motor, two speeding tickets...joy

01-07-2006, 10:20 PM	#3
Joel5.0 Registered Member Join Date: Oct 2005 Location: Sabana Grande, Puerto Rico Posts: 33	Re: O2 sensor help... You don't have to fix your CEL....use a 12v test light or LED. Check the next diagram on how to set it up. GL __________________ ACRONYMS: LUK=Let Us Know, GL=Good Luck, LMK=Let Me Know, JIC=Just In Case, BTSTDTRT=Been There Seen That Done That Repaired That and the classic... DILLIGAS=Do I Look Like I Give A S*** 1986 Mustang GT w/T-Tops NOW: 5.0L Stock SB, X303 Cam, 700 cfm DP Holley, 289 '66 Heads, 1.7 RR, Richmond Gear 4+1 Tranny, Centerforce DF, 2.73 Gears WIP: 3.90 Gears, LS Overhaul, Adj. LCA's & UCA's (Granatelli), T-Top weather striping and rear braces bodywork