tires don't wanna spin after gears

John · 09-29-2001, 07:30 AM

I dont think that not doing donuts is a problem

. My gears were installed a year ago, and I to rebuilt posi and new bearings. @ the track my ride will start to get sideways on burnout, but then driver side tire stops spinning. On the street both tires will fry till they die. You gotta remember the track is a super sticky surface. I am planning on rebuilding my posi again, but this time I'm gonna do it myself and use extra discs (couple of the old ones).John Oh BTW not to rag or anything but mid 14 w/ your mods seems slow to me. My coupe ran a 14.03 w/out cam intake & head work on a stock stall AOD and its a full weight car.

------------------
89 Notch: ASP Pullies,
K&N Air,Transgo shiftkit,Trans. cooler,FMS 3 core , FMS 4:10's, 1.5" cowl, cold air kit, hooker shorties(jet hot coated), O/R H-Pipe, ASP solid mounts, Energy Sus. Trans. Mnt. BBK 70mm TB, MSD 6al, Dual elec. fans, 5.0 Firepower Kit, Scorpion 1.6 RR's, Flowmasters, 73 mm MAF, cobra intake(ported), 1" phenolic spacer,ported stock heads and crower #512 cam.

[This message has been edited by John (edited 09-29-2001).]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
tires i can fit to 15 x 10 welds ?	5000cc	Windsor Power	3	05-08-2005 09:10 PM
Wheel Size Effect	BlackFireN2O	Windsor Power	6	10-23-2002 08:42 PM
New Tires	Venomouscobra	Modular Madness	4	06-12-2002 07:28 PM
18" Mustang Wheels & Tires Selling Cheap!!!	steedamustang01	Modular Madness	0	05-15-2002 11:31 AM
Why 3:55 gears for blower cars?	Mike_W	Windsor Power	2	05-26-2001 09:44 AM

09-29-2001, 07:30 AM	#2
John Registered Member Join Date: Dec 1998 Location: Ft.Myers, FL. Posts: 150	I dont think that not doing donuts is a problem . My gears were installed a year ago, and I to rebuilt posi and new bearings. @ the track my ride will start to get sideways on burnout, but then driver side tire stops spinning. On the street both tires will fry till they die. You gotta remember the track is a super sticky surface. I am planning on rebuilding my posi again, but this time I'm gonna do it myself and use extra discs (couple of the old ones).John Oh BTW not to rag or anything but mid 14 w/ your mods seems slow to me. My coupe ran a 14.03 w/out cam intake & head work on a stock stall AOD and its a full weight car. ------------------ 89 Notch: ASP Pullies, K&N Air,Transgo shiftkit,Trans. cooler,FMS 3 core , FMS 4:10's, 1.5" cowl, cold air kit, hooker shorties(jet hot coated), O/R H-Pipe, ASP solid mounts, Energy Sus. Trans. Mnt. BBK 70mm TB, MSD 6al, Dual elec. fans, 5.0 Firepower Kit, Scorpion 1.6 RR's, Flowmasters, 73 mm MAF, cobra intake(ported), 1" phenolic spacer,ported stock heads and crower #512 cam. [This message has been edited by John (edited 09-29-2001).]