MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 06-27-2006, 06:02 PM   #1
jalangst
Registered Member
 
Join Date: Sep 2002
Posts: 26
Default Re: Check Oil Light and No Oil Circulation

Yeah, does the check oil light only come on if the oil level is low? Or does it indicate other problems as well?
jalangst is offline   Reply With Quote
Old 06-27-2006, 06:25 PM   #2
Rev
Registered Member
 
Rev's Avatar
 
Join Date: Nov 1998
Location: Houston, Tx.
Posts: 3,887
Default Re: Check Oil Light and No Oil Circulation

Quote:
Originally Posted by jalangst
Yeah, does the check oil light only come on if the oil level is low? Or does it indicate other problems as well?
It only is supposed to come on when oil pressure is very low or near 0. I personally would trust the gauge more than the light. We used to refer to the indicator lights (when there were no gauges offered) as "idiot lights". That's partially because they only come on after something bad has already happened (that's assuming they worked as intended).

Rev
__________________
'66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi.

O.B.C. #2


'66 coupe

Last edited by Rev; 06-27-2006 at 06:42 PM..
Rev is offline   Reply With Quote
Old 06-27-2006, 10:57 PM   #3
StormsofAres86gt
black and blue
 
StormsofAres86gt's Avatar
 
Join Date: May 2005
Location: cinci.
Posts: 84
Default Re: Check Oil Light and No Oil Circulation

ok, so y not use fram? i have one to go on my car, but it isnt on there yet...
__________________
'93 3.0L SHO 5spd.
'89 5.8L lx 5spd. 351W(349hp/384tq)-tfs twisted wedge(stage 2), rpm air-gap, comp cam(294/294:518/518) and lifters, kb .060 pistons(11.5:1), mac shorties, pypes o/r X, mac 2.5" all the way back, holley 750, march u/d pulleys...it's alive..it's back together and running strong
-zach
StormsofAres86gt is offline   Reply With Quote
Old 06-28-2006, 01:01 AM   #4
vristang
Registered Member
 
vristang's Avatar
 
Join Date: Feb 2006
Posts: 50
Default Re: Check Oil Light and No Oil Circulation

Quote:
Originally Posted by StormsofAres86gt
ok, so y not use fram? i have one to go on my car, but it isnt on there yet...
Since doing some reading I have only used Fram filters for initial startups on a fresh rebuild. Basically it only has to work for a few minutes.

The major problem is the anti drainback valve, but the rest of the internals are not as good as in other filters.

Read these if you want to get into all the details
http://people.msoe.edu/~yoderw/oilfi...lterstudy.html
http://people.msoe.edu/~yoderw/oilfi...ilfilters.html

Here is a shameless plug for my site
http://www.freewebs.com/vristang/referencedwebsites.htm
I have a couple other good oil reads on that page (at the bottom).

jason
__________________
Check out my new Mustang website! - Including: TwEECer, EEC-IV, C&L, 351w Fox Swaps, PCV Oil Control, and more.

1990 GT - 408w - 17mpg
TwEECer RT 1.30A10 - X3Z - A9L strat. / EA
Forged Bottom End / Gapless Rings / CR 8.85:1 / Custom Cam / Ported Trick Flow Heads / Box Upr / Lightning Lwr
17x9 Cobras / Front 255s / Rear 275s / 5 Lug Cobra Disc Conversion / Auburn Ltd. Slip / 3.27 / 31 spline axles / Panhard Rod / Upr&Lwr Control Arms

1987 Red LX - 2.3L - Planning 2.3t Converison
vristang is offline   Reply With Quote
Old 06-28-2006, 01:05 AM   #5
vristang
Registered Member
 
vristang's Avatar
 
Join Date: Feb 2006
Posts: 50
Default Re: Check Oil Light and No Oil Circulation

It should be mentioned that the factory gauges are not known for their accuracy.

The oil indicator light should be an oil level sensor (on the drivers side?) of the oil pan.
I am not sure though as my fox did not come with an indicator light.

jason
__________________
Check out my new Mustang website! - Including: TwEECer, EEC-IV, C&L, 351w Fox Swaps, PCV Oil Control, and more.

1990 GT - 408w - 17mpg
TwEECer RT 1.30A10 - X3Z - A9L strat. / EA
Forged Bottom End / Gapless Rings / CR 8.85:1 / Custom Cam / Ported Trick Flow Heads / Box Upr / Lightning Lwr
17x9 Cobras / Front 255s / Rear 275s / 5 Lug Cobra Disc Conversion / Auburn Ltd. Slip / 3.27 / 31 spline axles / Panhard Rod / Upr&Lwr Control Arms

1987 Red LX - 2.3L - Planning 2.3t Converison
vristang is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tachometer & Check Engine Light issue... Nilreb Small Ponies 0 11-30-2004 04:13 PM
Check Engine Light Question. 5ohCOUPE Windsor Power 8 12-25-2002 12:20 AM
Check Engine Light 96GTPRT Modular Madness 5 05-20-2002 07:48 PM
Emissions related? Check Engine Light Coupe Devil Windsor Power 2 05-09-2002 11:49 AM
check engine light after long tube install tomazzzo Windsor Power 8 02-19-2001 05:49 PM


All times are GMT -5. The time now is 06:48 PM.


SEARCH