
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
#7 |
|
Registered Member
Join Date: Jun 2000
Location: Sherman, Texas
Posts: 188
|
Well, I am totally confused now. While messing around with the ignition switch behind the dash I managed to pull loose a wire that runs from the ignition switch to a fitting that splits into two purple wires so nothing happened when I turned the ignition key. I finally figured out what I had done and reconnected that wire. Still nothing when I turn the key - no click, nothing. The battery is new and good, the starter is new. I will change the alternator but I don't think it has anything to do with the fact that nothing happens when I turn the key. I changed the little relay box that connects to the pole at the back of the ignition switch. No change. I know that power is getting to the ignition switch because I have seen some arcing when I got the back of the ignition switch in contact with the dash. When I turn the key to start the engine the light on my console that shows what gear you are in dims so something is happening. Could it be the ignition switch itself? What am I missing? HELP!!! E.
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 5.8L Alternator Bracketry/Pullies | Gs835.8Stang | Windsor Power | 0 | 02-13-2005 03:44 PM |
| keep losing alternator belts | 82 GT | Classic Mustangs | 0 | 12-07-2004 07:14 PM |
| g2 to g3 alternator swap | bosss50 | Windsor Power | 0 | 04-25-2003 05:14 PM |
| Alternator Problems!!! | mongo93 | Windsor Power | 2 | 11-25-2002 01:42 PM |
| Alternator | xxrequiemxx | Windsor Power | 1 | 09-12-2001 02:16 AM |
