Threaded Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
09-21-2006, 09:51 PM
|
#2 |
|
Registered Member
Join Date: Apr 1999
Location: Cincinnati,OH
Posts: 1,511
|
Re: GT40P heads and 1.7 rockers ?
I used the stock valve covers but I had to take out the baffle for the oil fill and grind down the mounting area for the baffle with a dremel tool. Took about 5 minutes or so. You may get by with just taking out the baffle though. You'll have to check push rod length when you assemble the motor, each one is different, I used the stock pushrods with no shims under the rocker arms.
__________________
89GT,Pro-Bullet 306, H/C/I and a bunch of other stuff. *Sold* 00GT, Vortech S-Trim, Steeda Boost Pipe, C&L intake, Mac off-road H-pipe, Flowmasters, B&M Ripper shifter, Eibach Sportline springs, Koni Struts/shocks, MM full length subframe connectors, Cobra brakes, 3.73's. My Car Domain Page |
|
|
|
|