Real deal on the AL. flywheel?

Coupe50h · 10-30-2006, 06:45 PM

fiveohpatrol, did you have to get a dowel kit for the flywheel?

Dark, I will indeed be posting a follow up, if i run the same i'll be happy knowing some stress off the drivetrain. I wonder how you were talked into ditching the e-cam? I hope i wasnt in any threads telling you to ditch the e-cam, I always did talk highly about custom grinds, but only in stroker, and/or poweradder combos, seems the guys at ford knew how to draw up some specs in the alpahbet cams, at least for 302's.

Dark_5.0 · 10-31-2006, 03:25 PM

Quote:

Originally Posted by Coupe50h

fiveohpatrol, did you have to get a dowel kit for the flywheel?

Dark, I will indeed be posting a follow up, if i run the same i'll be happy knowing some stress off the drivetrain. I wonder how you were talked into ditching the e-cam? I hope i wasnt in any threads telling you to ditch the e-cam, I always did talk highly about custom grinds, but only in stroker, and/or poweradder combos, seems the guys at ford knew how to draw up some specs in the alpahbet cams, at least for 302's.

Well there were a few benifits from the custom cam.

It idles way better and the car is an LS1 killer from a roll.

I am about to buy an 11 to 1 308 short block and hope to see some 11's.

10-30-2006, 06:45 PM	#1
Coupe50h Registered Member Join Date: Aug 2002 Location: SanAntonio, Tx Posts: 957	Re: Real deal on the AL. flywheel? fiveohpatrol, did you have to get a dowel kit for the flywheel? Dark, I will indeed be posting a follow up, if i run the same i'll be happy knowing some stress off the drivetrain. I wonder how you were talked into ditching the e-cam? I hope i wasnt in any threads telling you to ditch the e-cam, I always did talk highly about custom grinds, but only in stroker, and/or poweradder combos, seems the guys at ford knew how to draw up some specs in the alpahbet cams, at least for 302's. __________________ X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's. race weight 3,160 12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear 13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
351 flywheel question	da89cup	Windsor Power	0	06-03-2006 04:21 PM
which flywheel inbalance?	dlb1982	Windsor Power	5	10-15-2002 07:25 PM
Aluminum Flywheel Help	buck95	Windsor Power	6	12-02-2001 07:29 AM
Bullit Mustang for sale! - REAL DEAL this time	88COBRA	Blue Oval Lounge	2	02-08-2001 03:10 PM
SUPER CHIP DEAL	RubY	Stang Stories	0	01-21-2001 10:32 AM