What the F

okiedragster · 11-20-2006, 08:58 PM

yea there is a clip that goes on the pump shaft that keeps it from droping in the pan, the clip is designed to slip on the shaft one way and wont come off the other end of the shaft...on the link i posted ,click on the pic to get a larger pic, this isnt stock but it will give you a idea of what goes on the shaft...
http://store.summitracing.com/partde...5&autoview=sku

Moonstang · 11-21-2006, 05:07 AM

Thanx for the input y'all. After a trip to Mustang Bros. today and a very long talk w/ his ace mechanic, (and the purchase of the factory shop manual) I think I got it figured out. Basicly whoever installed the last oil pump drive shaft DID install the clip BUT he installed the shaft upside down. One side is flat and the other side has about a 1/4" tapper allowing for easier alignment. Before i drop the oil pan, the ace said to try 2 things. 1st, using a 1/4" deep socket and a long extention, Fit the socket over the end of the drive shaft and try to turn the shaft a bit to change its position. 2nd. forget about aligning the distibutor w/ my marks. turn the crank by hand 1 full rotation. This will turn the oil pump drive shaft and change its position. But then I have to retime it. If that doesn't work. It's the old fashioned way and I drop the pan.
Good Times!
MoonStang

Dark Knight · 11-21-2006, 01:33 PM

Just line it up where you want, and bump the engine over with the starter. It'll drop right in, done that a bunch of times with no prob. That happens alot with the hex drive.

Rev · 11-23-2006, 12:13 PM

Quote:

Originally Posted by Dark Knight

Just line it up where you want, and bump the engine over with the starter. It'll drop right in, done that a bunch of times with no prob. That happens alot with the hex drive.

That's what I have to do every time I reinstall the distributor.

Rev

11-20-2006, 08:58 PM	#1
okiedragster Drag Racer and Mach1 Addict Join Date: Jan 2006 Location: southern oklahoma Posts: 85	Re: What the F yea there is a clip that goes on the pump shaft that keeps it from droping in the pan, the clip is designed to slip on the shaft one way and wont come off the other end of the shaft...on the link i posted ,click on the pic to get a larger pic, this isnt stock but it will give you a idea of what goes on the shaft... http://store.summitracing.com/partde...5&autoview=sku __________________ -FOR SALE- SUPER COMP DRAGSTER My 71 Mach 1

11-21-2006, 05:07 AM	#2
Moonstang Moon Equepted Join Date: Jul 2006 Location: Sucker Free City (San Francisco) Posts: 17	Re: What the F Thanx for the input y'all. After a trip to Mustang Bros. today and a very long talk w/ his ace mechanic, (and the purchase of the factory shop manual) I think I got it figured out. Basicly whoever installed the last oil pump drive shaft DID install the clip BUT he installed the shaft upside down. One side is flat and the other side has about a 1/4" tapper allowing for easier alignment. Before i drop the oil pan, the ace said to try 2 things. 1st, using a 1/4" deep socket and a long extention, Fit the socket over the end of the drive shaft and try to turn the shaft a bit to change its position. 2nd. forget about aligning the distibutor w/ my marks. turn the crank by hand 1 full rotation. This will turn the oil pump drive shaft and change its position. But then I have to retime it. If that doesn't work. It's the old fashioned way and I drop the pan. Good Times! MoonStang

11-21-2006, 01:33 PM	#3
Dark Knight Registered Member Join Date: Oct 1998 Location: Az Posts: 854	Re: What the F Just line it up where you want, and bump the engine over with the starter. It'll drop right in, done that a bunch of times with no prob. That happens alot with the hex drive. __________________ 84 convt,roller 302,AFR's, performer 3.55's, underdrives BBK shorties stock cam, 1.7's 13.58@102.84 and a '68 stang .. project 8 sec street car... 557 big block + N20 :-) http://members.cox.net/darkknight302/68nwrear.jpg