Rick 91GT - I got my RNH torque boxes! Sweeeet!!

[Rick 91GT]

Originally posted by Five0:
I just got some upper and lower battle boxes from wild rides, I can't wait to get them installed. I have had them for two weeks now but just not had the time to install them.

They look the same as what you have, who did you get yours from and what do they go for (RNH)?

RNH PERFORMANCE is ME "Rick91GT" my design is different then the Wild Rides pieces, I have a extra plate that actully attaches to the frame in another spot and ties it all together from both sides and the top making it stronger. Mine are also made from Stainless Steel so they will never rust, unlike some of the others who make them from mild steel. Each set is $100. I have had a set on my car for over ayear now and everything is still great no issues at all even after lots of 5500rpm+ launches.

James when you install them also weld the stock upper brackets in they are just spot welded from the factory, this will add a lot of strength. I also suggest welding up then seams in the lower box also. If you have SSM bars you may need to tap the seams back together, they are famous for ripping out.



------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension, SPEC stage III clutch, Lakewood SFI bell, S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! <B