

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
![]() |
#1 |
Registered Member
Join Date: Jan 2007
Posts: 12
|
![]() can anyone tell me I have gt40p heads that im having ported all the way out as far as they can go I have a stage 1 trick flow cam 499/510 lift, and corba intake with 24lb injectors will this be a good set?
|
![]() |
![]() |
![]() |
#2 | |
Registered Member
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
|
![]() Quote:
but your looking at a possible 300 rwhp through a 5spd, I never dynoed yet, but you should make little more power than my combo below.
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's. race weight 3,160 12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear 13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear |
|
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Jan 2007
Posts: 12
|
![]() yes i have upgrade my springs they good up to a .600 lift and I also have suspension work and 3.73 gears,bbk cold air intake and I also having the corba intake port match to the heads. 70mm throttle body and rite now the heads have 1.94 intake valves and 1.54 exhaust valves. So im hoping to see on motor at least some mid to low 11's. Thats what I'm hoping to see and I also have 1.6 ratio roller rockers to go with it....
Last edited by hrdroc; 01-07-2007 at 04:20 AM.. |
![]() |
![]() |
![]() |
|
|