Hybrid Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
01-08-2007, 04:15 PM
|
#1 |
|
Registered Member
Join Date: Jan 2007
Posts: 12
|
Re: cam?
Yeah I know I called Trick Flow and they was telling me that they know 1.6's would work and will give you that lift of the cam. But 1.7's will take up the lift .030 on the intake and the exhaust being intake .499 to .529 and exhaust being .510 to .540... So they told me that I had to check the clearance and myself and go from there. But I was hoping that someone would know and would be able to tell me for sure if they will work....
__________________
hrdroc-.600 lift springs GT40P heads ported all the way out,1.6 ratio roller rockers,24lb injectors,70mm throttle body,under pulley's,cobra intake port match to the head,trick flow stage 1 cam .499/.510 lift,cold air intake,73mm mass air meter,adj fuel pressure regulator. stock bottom end et street slicks- 13.50@104.99 best 60ft. 1.720 3.73 gears reg street tires- 14.89@101.25 best 60ft. 2.090 3.08 gears |
|
|
 |
|
|