MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 01-08-2007, 10:17 PM   #1
Coupe50h
Registered Member
 
Coupe50h's Avatar
 
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
Default Re: 5.0 mustang low RPM miss

Any mods?
If you have aftermarket rockers, adjustment could be out, you could be losing compression? just a guess.

Also, sounds ignition related, but it could be a weak fuel pump, you need to be sure your getting fuel pressure.
And that you dont have a defected coil, even if it's new.
Check engine grounds, and see if you can run a code scanner, and pull codes. could be a number of things, clean the maf, i dont care if it's new, and make sure all injectors are squirting.
good luck..
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's.
race weight 3,160

12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear

13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear
Coupe50h is offline   Reply With Quote
Old 01-09-2007, 07:07 PM   #2
Unit 5302
Registered Member
 
Join Date: May 1999
Posts: 5,246
Default Re: 5.0 mustang low RPM miss

Is it an audible misfire (backfire?) Does it clear itself out after a few pops?

Either one of those scenarios sound you could have a broken or failing fuel injector.
Unit 5302 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Safety Issue 64 - 70 Mustangs Mach1 Cobra Jet Classic Mustangs 20 07-11-2005 08:06 PM
Edelbroock RPM head on a 393 Redge Windsor Power 3 06-22-2005 10:55 PM
I NEED HELP! OK a REAL 1976 Mustang II suspension on a 65 Mustang coup! Raymond56 Classic Mustangs 1 06-15-2005 06:01 PM
t-5, is it the same in the 4 cylinder and V8 ex-lt1-guy Windsor Power 12 03-03-2002 01:59 AM
89-Mustang pulling trailer -vs- 2000 Mustang Five0 Stang Stories 7 04-01-2001 02:50 AM


All times are GMT -5. The time now is 11:24 AM.


SEARCH