Tremec 5 Speed Install Help

USMC302 · 01-09-2007, 10:49 AM

1. 50oz balanced
2. Mustang Clutch install This is mainly for 87-93, but it's going to be almost identical. Lots of good pictures. Good luck

zach0 · 01-09-2007, 11:25 AM

That helped out alot and me setup for just about everything but they did not talk about a pilot bearing or is that the same thing as the throwout bearing?

The transmisson I got is out of a 01' GT and the bellhousing does not remove like that which is starting to make leary of what I got. I want to put it on a 302 and thought that I could replace the bell housing to make it fit but when I pulled the bell housing off I saw all the gears behind it. The bell housing is held on by 12 bolts which bolt from the inside of the bell housing.

Or will this bolt up to a 302 block?

This is the tag on it:
XR3R-7003-AB RES AB 1002
1381-011 038372

Dark_5.0 · 01-09-2007, 11:39 AM

Quote:

Originally Posted by zach0

That helped out alot and me setup for just about everything but they did not talk about a pilot bearing or is that the same thing as the throwout bearing?

The transmisson I got is out of a 01' GT and the bellhousing does not remove like that which is starting to make leary of what I got. I want to put it on a 302 and thought that I could replace the bell housing to make it fit but when I pulled the bell housing off I saw all the gears behind it. The bell housing is held on by 12 bolts which bolt from the inside of the bell housing.

Or will this bolt up to a 302 block?

This is the tag on it:
XR3R-7003-AB RES AB 1002
1381-011 038372

No it will not work with a 302 or any other pushrod Ford. It only works with modular motors 4.6,5.4 etc...

01-09-2007, 10:49 AM	#1
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: Tremec 5 Speed Install Help 1. 50oz balanced 2. Mustang Clutch install This is mainly for 87-93, but it's going to be almost identical. Lots of good pictures. Good luck __________________ Last edited by USMC302; 01-09-2007 at 12:54 PM..

01-09-2007, 11:25 AM	#2
zach0 Registered Member Join Date: Apr 2001 Location: Hampton, Virginia Posts: 227	Re: Tremec 5 Speed Install Help That helped out alot and me setup for just about everything but they did not talk about a pilot bearing or is that the same thing as the throwout bearing? The transmisson I got is out of a 01' GT and the bellhousing does not remove like that which is starting to make leary of what I got. I want to put it on a 302 and thought that I could replace the bell housing to make it fit but when I pulled the bell housing off I saw all the gears behind it. The bell housing is held on by 12 bolts which bolt from the inside of the bell housing. Or will this bolt up to a 302 block? This is the tag on it: XR3R-7003-AB RES AB 1002 1381-011 038372 __________________ 1980 RX7 with 289 Ford V-8 bored .030 over, Very radical cam, Torker 2 high rise intake, Holley 650 Carb, MSD Nascar 6ALN ignition, MSD coil and distributor, Headers with dual open side exhaust. Over 300 horse. 1966 Mustang still in progress

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
98 v6 how to install speed chip	cowboysdad	Power Adders	0	09-12-2006 07:34 AM
Tremec tko install	68302	Classic Mustangs	2	01-26-2003 03:00 PM
Tremec Install - Finally Made Appointment!!!!!	NO SLO PK	Windsor Power	1	12-21-2001 04:34 PM
First ticket. Sucks, sucks bad.	zepherman	Blue Oval Lounge	46	12-16-2001 07:24 PM
Tremec Install Question	Tony91LX	Windsor Power	1	04-30-2001 04:32 PM