clutch quadrant new

Coupe50h · 01-22-2007, 09:41 AM

I had the same question a couple years ago when i replaced mine with a d&d quadrant, someone here told me i didnt need the springs.
I seewhat your saying about the return, but it should return smoother, maybe not as fast, the cable adjustmant is very important, i busted a cable in this process, still cant figure out the firewall adjuster so i just screw it all the way in. The return process is in the pressure plate correct? someone?

~The Jester~ · 01-26-2007, 12:29 PM

Correct coupe. The "return" IS your pressure plate. Aftermarket quadrants don't have adjuster or springs, cuz ya don't need them. The factory adjuster allows you to simply grab the pedal, and yank it towards the dash to adjust the cable.

Firewall adjusters are different according to manufacturers, but are also simple to adjust. Check with YOUR manufacturer, but here's how we do the one on my car. Run the adjuster all the way in towards the firewall. Then pull on the cable, check the "distance" between the adjuster and the cable end. Turn the adjuster nut OUT until you have about the width of a dime inbetween the pieces. Let go of the cable, and you're set. Some fine tuning will be needed after driving the car and getting a feel for it.

Hope that helps!!

01-22-2007, 09:41 AM	#1
Coupe50h Registered Member Join Date: Aug 2002 Location: SanAntonio, Tx Posts: 957	Re: clutch quadrant new I had the same question a couple years ago when i replaced mine with a d&d quadrant, someone here told me i didnt need the springs. I seewhat your saying about the return, but it should return smoother, maybe not as fast, the cable adjustmant is very important, i busted a cable in this process, still cant figure out the firewall adjuster so i just screw it all the way in. The return process is in the pressure plate correct? someone? __________________ X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's. race weight 3,160 12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear 13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear

01-26-2007, 12:29 PM	#2
~The Jester~ Rat Killer Join Date: Aug 2002 Location: Cold ass Ohio Posts: 1,143	Re: clutch quadrant new Correct coupe. The "return" IS your pressure plate. Aftermarket quadrants don't have adjuster or springs, cuz ya don't need them. The factory adjuster allows you to simply grab the pedal, and yank it towards the dash to adjust the cable. Firewall adjusters are different according to manufacturers, but are also simple to adjust. Check with YOUR manufacturer, but here's how we do the one on my car. Run the adjuster all the way in towards the firewall. Then pull on the cable, check the "distance" between the adjuster and the cable end. Turn the adjuster nut OUT until you have about the width of a dime inbetween the pieces. Let go of the cable, and you're set. Some fine tuning will be needed after driving the car and getting a feel for it. Hope that helps!! __________________ d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply.....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
? about if need Clutch Quadrant	venumus93	Windsor Power	10	04-09-2007 02:39 PM
clutch cable/solid quadrant install	greydan	Windsor Power	5	01-21-2002 05:15 AM
Clutch quadrant	HKstang	Windsor Power	1	03-06-2001 04:55 PM
Clutch Quadrant?? PLEASE help!	Chris_H	Windsor Power	8	03-05-2001 11:00 PM
billed 5 times to install clutch by Pauls Auto, please read and give opinions (long)	beefcake	Blue Oval Lounge	2	02-23-2001 03:05 PM