horn problems

66-351 · 01-24-2007, 10:18 PM

It may be the contacts in the horn ring, or the horn ring may be loose.

j_silver · 01-25-2007, 10:37 AM

thanks but I have checked that and it all looks good. I should also mention that I had to replace the steering wheel. ever since I did that I started with this problem. I was told that maybe i should pull the steering out a little, but Iam a little hesitant to do that.

Rev · 03-11-2007, 06:17 PM

Quote:

Originally Posted by j_silver

thanks but I have checked that and it all looks good. I should also mention that I had to replace the steering wheel. ever since I did that I started with this problem. I was told that maybe i should pull the steering out a little, but Iam a little hesitant to do that.

What I eventually had to do on my '66 was to use the horn lead as a signal to a "new horn relay" that activated my new auto supply horn. Not exactly concourse correct, but it works perfectly and is very loud.

Rev

goodyear1984 · 03-12-2007, 01:11 AM

my 61 galaxie had that problem the ring was shot/bent and i changed the spring..also idk if its the same set up but there was these little tabs that hold and lock in the horn to the streeing wheel if thoes are brok it may cause that too

01-24-2007, 10:18 PM	#1
66-351 Registered Member Join Date: Jan 2007 Posts: 26	Re: horn problems It may be the contacts in the horn ring, or the horn ring may be loose.

01-25-2007, 10:37 AM	#2
j_silver Registered Member Join Date: Jan 2007 Posts: 6	Re: horn problems thanks but I have checked that and it all looks good. I should also mention that I had to replace the steering wheel. ever since I did that I started with this problem. I was told that maybe i should pull the steering out a little, but Iam a little hesitant to do that.

03-12-2007, 01:11 AM	#4
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: horn problems my 61 galaxie had that problem the ring was shot/bent and i changed the spring..also idk if its the same set up but there was these little tabs that hold and lock in the horn to the streeing wheel if thoes are brok it may cause that too __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
what if any problems with your Modular Model Gt/Cobra?	fixer	Modular Madness	18	04-03-2005 09:18 AM
Any gains from removing holley choke horn?	crazypete	Windsor Power	11	10-16-2004 07:38 AM
HELP: Problems after Paxton Novi 1000 install	Meatman	Windsor Power	3	10-17-2002 06:03 PM
Don't you love electrical problems ?	fiveohpatrol	Windsor Power	5	10-31-2001 03:31 AM
The horn	nicolette	Classic Mustangs	4	10-14-2001 10:23 PM