Head valve covers

Rick 91GT · 01-26-2001, 08:30 AM

I have the red on my car. You need to buy the breather stand for a push in breather. You will use a hole saw to cut a hole for the breather stand and it all goes together nicley, the direction are easy to understand. After I used the holw saw I had to take a file to make mine fit perfect and tight. The breather stand has to screens in it so the oil will not make it up the breather, you need to cut the top screen out and install a gromet, I use the 1-1/4" Mr.Gasket models with the baffle in the bottom, then you just push your breather in to that, very easy. I like the covers but get a set of ROL's gaskets, I like my FMS stell core one but I am having a problem with it starting to leak, the ROL's are great from what I hear and they are cheaper $9.00 each. Shoot me e-mail if you can I'll send you some pic's rhawver@strouse.com.

------------------
My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Painted valve covers	surfbeast	Modular Madness	3	04-23-2003 08:19 PM
Valve Covers	NotchJohnson	Windsor Power	20	10-17-2002 12:01 PM
tfs intake, tfs valve covers, NOTHING FITS	93GTDIN	Windsor Power	9	07-01-2002 12:22 PM
Valve covers	rbatson	Windsor Power	8	06-10-2002 11:56 PM
Ford Racing valve covers	2FastLX	Windsor Power	2	06-19-2001 04:14 PM

01-26-2001, 08:30 AM	#5
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	I have the red on my car. You need to buy the breather stand for a push in breather. You will use a hole saw to cut a hole for the breather stand and it all goes together nicley, the direction are easy to understand. After I used the holw saw I had to take a file to make mine fit perfect and tight. The breather stand has to screens in it so the oil will not make it up the breather, you need to cut the top screen out and install a gromet, I use the 1-1/4" Mr.Gasket models with the baffle in the bottom, then you just push your breather in to that, very easy. I like the covers but get a set of ROL's gaskets, I like my FMS stell core one but I am having a problem with it starting to leak, the ROL's are great from what I hear and they are cheaper $9.00 each. Shoot me e-mail if you can I'll send you some pic's rhawver@strouse.com. ------------------ My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98