MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 10-07-2007, 11:42 PM   #1
Evil torquetress
95' gt 5.0
 
Join Date: Oct 2007
Location: North Carolina
Posts: 5
Default Re: Help A Chick Out!!!

Well I just replaced my fuel filter today. I have always done a routine tune-up. My dad said it sounds like spark knock??? I'm going to replace my plugs neways I have shitty bosch. So I don't need my smog pump? How would I know what size belt to put on if I removed it? Yes......When I put higher octane in my car it stops(93). My car has been good to me so far it's still driveable. I got my car 2 years ago and it set for 2 years before I got it so far I've only had to replace my altnator, spark plugs oil......tune up..duh...and my clutch. Other than that I haven't had any problems. Now I have this and it's driving me crazy because I have lost alot of power because of it. Damn grandma might beat me in a race right now.
Evil torquetress is offline   Reply With Quote
Old 10-09-2007, 01:30 AM   #2
USMC302
Registered Member
 
USMC302's Avatar
 
Join Date: Apr 2001
Location: Gallatin, Tn
Posts: 1,326
Default Re: Help A Chick Out!!!

If the pinging stopped when 93 octane was used then it's 100% a timing issue. Have you recently changed or messed with timing? Grab a timing light, pull out the spout connector and set it at 10 degrees and go from there, test the car after small increments of two degrees.
__________________
USMC302 is offline   Reply With Quote
Old 10-11-2007, 07:53 AM   #3
tmoss
Registered Member
 
tmoss's Avatar
 
Join Date: Mar 2003
Location: Saint Louis, MO
Posts: 634
Default Re: Help A Chick Out!!!

Get some sea foam and run it through the engine and then add some to the tank. Combustion chamber carbon build up can do that too.
__________________
Tom (Torque) Moss
88Gt 5spd Vert, FLowmaster Catbacks, stock cam advanced 4° @ 108.5° ICL, NMRA prepped GT40P heads 1.85/1.55 valves and 1.7 rockers, MAC P headers Jet-Hot coated, 97 Exlporer intake (ported lower), TB and injectors. 277RWHP/330RWTQ (SAE).

http://www.fastlanecars.com/
tmoss is offline   Reply With Quote
Old 10-11-2007, 04:17 PM   #4
Evil torquetress
95' gt 5.0
 
Join Date: Oct 2007
Location: North Carolina
Posts: 5
Default Re: Help A Chick Out!!!

Ok..well I will have it checked this weekend and I'll repost and let you guys know if that is it thank you for all your help so far. And also messing with my distributor can that mess up my timing? like I said only things I have done to it is my clutch altnator and took the cap off underneathe my distributor....and tune-up. Also does autozone have db1 and db2 I think my car is db1 to check all my codes so I can post them up?
Evil torquetress is offline   Reply With Quote
Old 10-12-2007, 06:06 PM   #5
USMC302
Registered Member
 
USMC302's Avatar
 
Join Date: Apr 2001
Location: Gallatin, Tn
Posts: 1,326
Default Re: Help A Chick Out!!!

Turning the dist, or moving it at all will throw timing off, turning the dist is how you set it in the first place. Autozone should be able to pull the codess from your car fine. Good luck!
__________________
USMC302 is offline   Reply With Quote
Old 10-23-2007, 10:34 PM   #6
collinjay71
NOS Pony
 
Join Date: Mar 2005
Location: Regina SK Canada
Posts: 22
Default Re: Help A Chick Out!!!

If you messed with the distributor you most likely advanced the timing and thats causing your knock. I would run the 93 octane until you get it fixed. As far as the smog pump you can get an eliminator kit for pretty cheap on summit racing.

summitracing.com
collinjay71 is offline   Reply With Quote
Old 11-08-2007, 03:29 AM   #7
sykostanger
syko
 
Join Date: Nov 2007
Location: Texas
Posts: 7
Default Re: Help A Chick Out!!!

I agree with USMC302, its no doubt the timing.
sykostanger is offline   Reply With Quote
Old 11-12-2007, 12:03 AM   #8
Unit 5302
Registered Member
 
Join Date: May 1999
Posts: 5,246
Default Re: Help A Chick Out!!!

Hmm... This is a bit of an odd problem in my book. It sounds to me like you might have a couple different issues, but if it was working before and you did something to it, it's usually whatever you did to it that's causing the problem now.

It sounds to me like you just changed the distributor cap and rotor, but you didn't intentionally move the distributor itself. Even so, some times people that do mess with the timing don't tighten the distributor bolt down well enough, and that could be your issue.

Just for the record, a 1995 Mustang GT runs an OBD-I emissions system, not the newer 1996+ OBD-II style.
Unit 5302 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help This Chick Out HotMustangChick Appearance & Detailing 5 02-25-2005 05:52 PM
Chick with a love for Stangs...about me Stang Obsession Blue Oval Lounge 37 08-11-2002 11:56 PM
Chick with a love for Stangs...about me Stang Obsession Blue Oval Lounge 0 08-08-2002 04:53 AM
Camaro chick part II bigwhitecobra Stang Stories 11 03-07-2001 08:46 AM


All times are GMT -5. The time now is 06:25 PM.


SEARCH